Hello All,

Ok, here I am showing a simple CAD Diagram/Graph about the Equations I was mentioning before on previous post:


Now, on this 'Event' I am showing SPACE as All Three Dimensional (3D) Coordinates or x, y, z, and on this specific movement the B Field Directional Vector is PARALLEL to 'y' Axis, as also is PARALLEL to Time (t) Axis.

This 'Event' only Frames the displacement of Magnetic Field from t to t' Time interval, represented as "Past Field" and "Future Field".

Again, the Field Strength or Flux Volume remains Constant during this movement., NO Variation, except its displacement through Spacetime.

The Linear Movement of the Field here follows the y Axis direction, which is the same as Time Displacement.

Resuming: here we have THREE (3) PARALLEL AXES which are y, t & B Field Vector, where the Magnetic Field Travels through Spacetime.

I did not want to "populate" that much this graphic by adding the Sequential Coils Alignment here...but it needs to be understood that the Sequential Coils Alignment CENTER AXIS,, ALSO follows these Three PARALLEL AXES  y, t, B Field Vector.

Regards All

Ufopolitics

Hello again.

Now, on this Graphic I have incorporated the Sequential Coils Groups #1 and Group #6 (a "jump" NOT including all the in-between steps [2, 3, 4, 5])...to illustrate the displacement of the Field through Spacetime, while ALL Sequential Coil's Groups remains in the same place:


As I mentioned on previous post, the B Field Directional Vector, the y Axis and the Time Axis, which are Parallel are also ALIGNED (PARALLEL) to the GRAVITATIONAL CENTER OF ALL SEQUENTIAL COILS.
Again, Flux or Field Strength remains CONSTANT in ALL Spacetime displacement.
Please note that on this Diagram I have introduced y & y' as the Axis displacement through Y Axis, which here "coincide" with the displacement t & t' on Time  Axis
As you can also note that X Axis remains the same from x to x.
Also assuming that Z Axis also remains at same 'Height' during this 'Event' (not represented here)
Concluding, as I mentioned on the Equation Post, that ONLY ONE (1) Axis of the SPACE Coordinates have a Variation over Time, as the other Two Space Coordinates remain the same.

Again, this is about the SIMPLEST DISPLACEMENT through Spacetime, which is LINEAR, as it relates to this Development of the LINEAR FIGUERA GENERATOR.

Regards

Ufopolitics

Hello All,

Ok, again I am bringing a BRUSHED ROTOR IMAGE from a Generator Head to use it as a Comparison to my Linear Generator:


Above is a Brushed Generator Head ROTOR, which is the INDUCING FIELD, or the EXCITER.

The way it works:

1- A CONSTANT DC (NOT AC) INPUT is received to the Coil(s) on Rotor through the Two (Positive-Negative) Brushes to the Continuos Slip Rings.

2- Once Coils are powered by the Two Brushes, they Project a CONSTANT Magnetic Polarization on the TWO FACES of the Rotor Laminated Steel Core.

Threfore, on this type of EXCITATION the FLUX is CONSTANT (DOES NOT VARY STRENGTH WISE NOR ON SPATIAL VOLUME, AS FIELD DOES NOT REVERSE EITHER)

The Movement (Variation) of this Inducing Magnetic Field through Spacetime is LOOPED into a FULL, CONSTANT ROTATION (NOT LINEAR)

This Field Polarization does NOT expand through the whole 360º of the Circumference  (Approx 90º to 100º each Pole width)

And of course, the Fields or Stator for the Output are also Circular., in order to COLLECT INDUCTION EVENLY.

The reason why I'm bringing this up, is just to compare the Linear Generator disclosed here with this type of Machine, to point out the similar characteristics between the Two Examples.

1- On BOTH Machines the EXCITING-INDUCING FIELD COILS are fed (Powered) by a CONSTANT DC INPUT.
2-  On BOTH Machines the EXCITING-INDUCING FIELD COILS Magnetic Polarization is CONSTANT (DOES NOT ALTERNATE POLES, REVERSE, EXPAND NOR CONTRACT FIELD VOLUME OR STRENGTH)
3- FLUX DOES NOT VARY (EXCEPT BY SPACETIME ROTATION/POSITIONING)

Only difference being that this Generator is based  on a CIRCULAR SPACETIME FIELD DISPLACEMENT/MOTION and the other Machine is based on a LINEAR/RECIPROCATING DISPLACEMENT./MOTION.

Or "GEOMETRICAL SPACETIME DISPLACEMENT DIFFERENCES OF INDUCING FIELD MOVEMENT"

Regards

Ufopolitics

PD/ EDIT: On BOTH Machines the DC INPUT may INCREASE as well as its Frequency/Rotation in order to COMPENSATE when LOADED, However, once the LOAD is satisfied, it  KEEP those Parameters CONSTANT.

Quote from: Ufopolitics on Dec 18, 2025, 12:53 PM

Hello dear friend, Ufopolitics,

Thanks for adding the brushed rotor image this makes the comparison clearer.

I agree this is a good reference example: constant DC excitation, fixed magnetic polarity, and induction produced by **spatial motion of the field** relative to the output windings.

Framed that way, the distinction you are highlighting is mainly **geometrical** circular field displacement in the rotary machine versus linear (or reciprocating) displacement in your generator concept.

Regards, Alex

Hello All,

Ok, I just have ONE (1) more Sequential Coil to build...got 14 so far.


Regards All

Ufopolitics