Resonance and high frequency

[Classic]

Original design, source of inspiration for my replication https://youtu.be/LRFI0V-2DlA?si=ulYpiq8ryU-1WJS7

[Classic]

So, choosing wise the right size of wire in respect with input signal will yield a better and powerful output. I have used 0.75 sqmm flexi wire instead of 2.5 sqmm multi strand wire (should be +45 strands for 2.5 and resistance will be half) just to prove it can work with same components (zvs board circuit).

All is needed is a way to interrupt current at certain frequency (to match natural frequency of coil at least) and allow to have opposite flux magnetic and electric to magnify the output without exotic cores in secondary coil(s) and use as many secondaries as you can fit (physically) in the same magnetic field created by 1 primary.

Highly recommended https://youtu.be/HHsG_dBZyCM?si=FXtTADdHpuZpEZj1 

Anyway it is advisable to test all components even if they are provided by trusted and famous source not only the cheap ones.

Also: https://youtu.be/O_IvGiKePAc?si=KmPeFpm3BKo8fV4a

[kampen]

Dear Classic,
[color=var(--input-txt-color)]Just want to drop you a message and say Thank You.[/color]
[color=var(--input-txt-color)]Keep up the good work.[/color]
[color=var(--input-txt-color)]Alex[/color]

[Classic]

Dear kampen,

You are welcome. As can be observed I did not specified power source as any power source can be used within specified values of zvs circuit in my case between 12 and 30 V, 5 to 15 amps, but current should be at least 5 amps, not 3.2  amps as my power source which somehow will downgrade significat the output. Yet, this setup is able to output +2kw loads with minimal safety feature protection (electronic components).

Additional for daily use cutoff protection should be implemented in form of a thermostat with mechanical displacement, which will further increase the price for the whole setup, but still yet under maximum £200 budget.

For the moment, no additional experiments planned as all what needed to prove as been done and all focus goes now for the power source where some interesting effects have been achieved with very low cost for production and almost no operational costs.

Anyway new methods for amplification are in sight at low cost (optical power transfer) and resonance and high frequency is the main key factor where magnetic field plays essential role not only electric.

Any practical applications and implementation methods should be discussed in a separate thread, where I am happy to contribute to my best of (my limited) knowledge.

[Classic]

Hello everyone,

I wonder if anyone else can see this very same effect starting for findings of Faraday paradox, being exploited in different ways by rotational machines in a form of a motor or generator (many patents) and working principle of bifilar and bucking coils where instead of kinetic energy pulse frequency and duty time is used for modulation of speed of saturation/desaturation of magnetic field/flux and how Eddy currents can generate beneficial effects at certain speed.

I think this may hold the key for any solid state electric generator and great deal of research has been done mostly quiet.

Observing description of working principle in Tesla notes attached and Daniel Cook coils we can see the very same effect and currents running against each other, weakening magnetic field and strengthening in certain direction, acting as piston and one way valve in a pump. Using what is ordinary known as standing waves and harmonics.