Open Source Free Energy & Over Unity Forums...and If You think none of these terms are real, they do not exist, or is just fiction, then PLEASE>>DO NOT ENTER!!




Free Energy will change the World - Free Energy will stop Climate Change
Free Energy will give us hope,
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Stefan Hartmann/Owner/Admin at overunity.com
I really love those words from Stefan, reason why they are here..
and sadly, whole site now on "Read Mode Only" due to Stefan's illness


The 19th Century Manchester Bipolar DC Dynamo

Started by Ufopolitics, Jan 17, 2024, 10:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ufopolitics

Introduction,

After the great find by Member GreyWolf47 about this Manchester Machine, being possibly, the Inspiration to Clemente Figuera on his Generator invention, patented back in 1908...I have decided to go deeper into the research and Study of such DC Generator Machines.

At these times, on the Twenty First Century, it is very hard to find deeper information about these type of machines...so, contributions of any available data and info, would be appreciated.

All these Machines became obsolete technology, after the appearance of the AC Polyphase Generators Worldwide, and basically on the higher developed Countries at that time, like in Europe and the United States, where Nikola Tesla, in a joint Partnership with George Westinghouse, were the winners on the contest to take the contract to illuminate the World Fair, that was taking place in Chicago, back in 1896. Also known as the "War of Currents"...between Westinghouse and Thomas Alba Edison in partnership with J.P. Morgan and General Electric...
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

Some information appears on the Hawkins Electrical Guide Series Books by Nehemiah Hawkins, first edition on 1914...
And exactly on page 201 of this book, there is some reference to this machine. (image from book below)

MANCHESTER_BIPOLAR.png
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

A more detailed Perspective View of the Manchester Bipolar Machine ...

QuoteA 19th Century illustration of the Manchester Dynamo, an electrical generator that creates direct current using a commutator, the first electrical generators capable of delivering power for industry. Manchester based Henry Wilde (1833-1919) invented the dynamo-electric machine, or self-energizing dynamo that replaced the permanent magnets of previous designs with electro-magnets and in so doing achieved an enormous increase in power. Werner von Siemens is more usually credited with the invention, but in fact, discovered independently.

MANCHESTER_BIPOLAR_DYNAMO_PRINT.jpg
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

GreyWolf47

Ufopolitics: Thank you for starting this new thread.

I ALREADY have the iron cores to build this machine and have already wound my center secondary coil with 3013 turns of 22 ga wire. I had the cores for the N pole and S pole electromagnets. They were wound with 300 turns of 16 ga wire in a single continuous coil. I am unwinding them now to   ''REPURPOSE" that wire into the correct configuration. 

The first layer will be 150 turns of 16 ga CCW. The next layer will be 75 turns CCW. The next is 50 turns CCW. Then the last layer of 25 turns CCW. These are the coil series for the N pole electromagnetd controlled by the commutator contacts N1 thru N8. The N1 contact connects to the 25 turn coil and N2 controls the 50 turn coil then the N3 controls the 75 turn coil and the N4 controls the 150 turn coil. The other core will be wound in the same manner except wound CW to give a S pole set and controlled by contacts S9 thru S16. I hope to be testing this device soon.

Ufopolitics

Quote from: GreyWolf47 on Jan 17, 2024, 06:49 PMUfopolitics: Thank you for starting this new thread.

I ALREADY have the iron cores to build this machine and have already wound my center secondary coil with 3013 turns of 22 ga wire. I had the cores for the N pole and S pole electromagnets. They were wound with 300 turns of 16 ga wire in a single continuous coil. I am unwinding them now to  ''REPURPOSE" that wire into the correct configuration.

The first layer will be 150 turns of 16 ga CCW. The next layer will be 75 turns CCW. The next is 50 turns CCW. Then the last layer of 25 turns CCW. These are the coil series for the N pole electromagnetd controlled by the commutator contacts N1 thru N8. The N1 contact connects to the 25 turn coil and N2 controls the 50 turn coil then the N3 controls the 75 turn coil and the N4 controls the 150 turn coil. The other core will be wound in the same manner except wound CW to give a S pole set and controlled by contacts S9 thru S16. I hope to be testing this device soon.

Hello GreyWolf47,

Great!

Now are you using the same structure as the Manchester have?
Or, meaning 3 Rods in Parallel?
Or following Figuera configuration?
Or straight up all 3 in a line?

Isn't a 22 gauge too small for a Secondary?

Regards

Ufopolitics
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci



Open Source Free Energy-Over Unity Systems Research/Development/Disclosure/Discussions