I am asked how the design from the video where the self-propulsion with battery charging is demonstrated. All I can say is that the author's magnetic rotor is clearly a four-pole rotor. This can be seen in the way of winding the stator elements. How should the switching algorithm work? I have completed in my blog article. The same as it should be realised in the Holcomb Energy System with the difference that Holcomb has developed a power electronics system for this purpose.

https://rakatskiy.blogspot.com/2022/06/blog-post.html

Hello Rakarskiy,

Absolutely it was NOT the answer that I expected!!

You COMPLICATED everything in your answer, went all the way back to the Faraday Homopolar Generator, and Tesla Coil, which has absolutely NOTHING to do with what I have posted previously.

No, Tesla Coil "Evolution" has absolutely nothing to do with what I am working on NOW!!

The Tesla "Evolution" you have shown is nothing more than Open Transformers with TAPS...You know that we can add as many TAPS to a winding on a Transformer?

Still, Tesla Coil is NOT about a SEQUENTIAL ELECTROMAGNETIC PULSES of DC CURRENTS, regulated by a DRIVER, NOT BY AC MAINS!!!

Figuera Patent 1908 ONLY!!...Do NOT keep citing OTHER FIGUERA PATENTS, that has NOTHING to do with the 1908!!

Figuera only diagram on 1908 is a very BASIC design for BASIC UNDERSTANDING ONLY!!

Now you are trying to say, that what I am developing IS NOT Figuera?

Plus You are saying that "Tesla Coil Evolution" (fig: 2,3,4,5) is "exactly" what I am working now??!! (" You'll see your design right away  from early versions of Tesla's core transformer (2, 3, 4, 5))

What I see is that simply, you can not give or have a clear answer nor explanation for what I am developing/working at present time...so, the "typical reaction" is to try and find any "similarities" around...and automatically "attach" all in one package...

Plus, related to ROTARY GENERATORS...No matter what you say or wrote before...

The only part of the wire that gets an Induction from a Rotary Field are the VERTICAL WIRES inside groove, in each loop of ANY Rotary Generator out there.

All Rotary Generators have the "excess" Horizontal wires on Loop, BENT backwards, completely AWAY from Field Rotation and Interactions.


Ufopolitics

Hi Ufo,

I agree with all your comments about Rakarskiy's post.  I have built several Tesla coils and am also a licensed Ham Radio operator with an Advanced class license.  So I have quite a bit of experience with RF circuits.  The Tesla Coil is an RF circuit.  It has nothing at all to do with what you are doing.

I am a little confused by this statement though "he only part of the wire that gets an Induction from a Rotary Field are the VERTICAL WIRES inside groove, in each loop of ANY Rotary Generator out there.

All Rotary Generators have the "excess" Horizontal wires on Loop, BENT backwards, completely AWAY from Field Rotation and Interactions."

When you have some extra time could you please explain what you mean by this?

I am confused about this because all motors and generators I have worked on have the wires going one way on one side of the field and the other way on the other side so as to be induced by both poles.  What am I missing?

As a side note my son gave me a nice 3D printer for Christmas so that should make building a good Part G much easier.

Take care,
Carroll

Здравствуй, НЛОполитика!

Вы, наверное, не поняли моего ответа (или мы не поняли друг друга)

Есть структура магнитной системы преобразователя: замкнутый кольцевой сердечник и стержневой сердечник (то, что я видел у вас, это стержневой сердечник не замкнутый), т.е. как в трансформаторах Тесла, согласно позициям на слайде со страницы Википедии. Давайте рассмотрим все способы первичной и вторичной цепей на магнитопроводящем стержневом сердечнике из моего пояснения.

а) Трансформатор Тесла работает на взаимной индукции, у него не может быть генерации, чтобы сделать генерацию необходимо избавиться от явления межвитковой взаимной индукции.

б) Фигера в патенте 1902 года просто описал магнитную систему, но не раскрыл способ возбуждения, хотя и указал пару электромагнитов. После его смерти в опубликованном патенте 1908 года была раскрыта как раз система возбуждения с применением резистивного регулятора, который попеременно и плавно изменяет ток в катушках и направление магнитной индукции, не отключая катушки от источника постоянного тока. На рисунке показана упрощенная схема коммутации модуля катушки. Таким образом, Фигера избавился от явления взаимной индукции и получил электромагнитную индукцию в обмотке коллектора. Его пара электромагнитов не имеет отключения от источника постоянного тока, изменяется только сопротивление в цепи катушки;

в) Ваш вариант (упрощенный на рисунке) тоже имеет решение, но он отличается от фигера, у вас есть система катушек возбуждения, которые через аналоговый коммутатор производят замыкание и размыкание катушек по определенному алгоритму, формируя направление и плотность магнитной индукции в сердечнике. Ваш вариант сильно отличается от фигера, но преследует ту же цель избавиться от явления взаимной индукции и получить изменение плотности и направления магнитной индукции в сердечнике.

Этот способ возбуждения поля, без явления взаимной индукции, чисто ваш, вы его изложили на всеобщее обозрение.

Quote from: citfta on Jan 04, 2024, 02:13 PMHi Ufo,

I agree with all your comments about Rakarskiy's post.  I have built several Tesla coils and am also a licensed Ham Radio operator with an Advanced class license.  So I have quite a bit of experience with RF circuits.  The Tesla Coil is an RF circuit.  It has nothing at all to do with what you are doing.

I am a little confused by this statement though "the only part of the wire that gets an Induction from a Rotary Field are the VERTICAL WIRES inside groove, in each loop of ANY Rotary Generator out there.

All Rotary Generators have the "excess" Horizontal wires on Loop, BENT backwards, completely AWAY from Field Rotation and Interactions."

When you have some extra time could you please explain what you mean by this?

I am confused about this because all motors and generators I have worked on have the wires going one way on one side of the field and the other way on the other side so as to be induced by both poles.  What am I missing?

As a side note my son gave me a nice 3D printer for Christmas so that should make building a good Part G much easier.

Take care,
Carroll

Hello Citfta,

What I am referring to is the "Basic Physics 101" about lines of force and cutting the wires...now, "vertical, or Horizontal" is always relative to the point of view we look at.

The point is clear and precise, all wires that are "Tangential" or Parallel to lines of force will NOT get induced. Simply, because lines of force will flow without "cutting" a straight wire, but flowing along.

The way that Induction takes place in wire, is whenever Wire is at 90º related to Field Lines or B Field Vector of Force, Induction will occur.

Now, if we move this general concept into a typical single phase generator, where stator have all the "Induced Wires" in several overlapped loops, I am referring that only wires INSIDE the Steel Stator Groove, will get full induction, while all other part of loop, which is above and below the groove lines, will not receive any induction at all, they will just transfer the induced force through the whole loop...because they are simply Parallel to lines of force, not perpendicular like the ones on the groove are.

Hope you understand this part.

Cheers

Ufopolitics