FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[Ufopolitics]

Hello everyone!!

I am posting here a series of graphics and their respective explanation to help a dear friend of mine (I am not revealing who he is now), and is going soon to be making the Figuera Linear Generator TESTS but with only 13 Sequential Coils instead of 15 like I originally have posted previously.

We have been trying to communicate through email prior, but because of mail threads we kind of get lost or miss images or explaining text, etc.

So, on this platform we will have a much better way to explain and show images, as always could simply scroll back, to review them again. (that was the main purpose I build this website.)



So, on image above I have cleaned up all previous secondary circuits plus test points, leaving only the 13 Sequential Coils and their connection with the N & P FET Boards.

And here I will go, step by step, on how the sequential order works starting on #1 terminals (positive and negative at unison, same time)

1- When BOTH #1 Terminals activate ON, at both boards (-/+) then Coils B1, B2, B3, B4, B5, B6 & C Turn ON, while R1, R2, R3, R4, R5, R6 are OFF, this is Group # 1 ON (Extreme Left Field Location)

2- When BOTH #2 Terminals activate ON, at both boards (-/+) then Coils B2, B3, B4, B5, B6, C & R1 Turn ON, while B1, R2, R3, R4, R5, R6 are OFF, this is Group # 2 ON

3- When BOTH #3 Terminals activate ON, at both boards (-/+) Then Coils B3, B4, B5, B6, C, R1 & R2 Turn ON, while B1, B2, R3, R4, R5, R6 are OFF, this is Group # 3 ON

4- When BOTH #4 Terminals activate ON, at both boards (-/+) Then Coils B4, B5, B6, C, R1, R2 & R3 Turn ON, while B1, B2, B3, R4, R5, R6 are OFF, this is Group # 4 ON (Center Field Location)

5- When BOTH #5 Terminals activate ON, at both boards (-/+) Then Coils B5, B6, C, R1, R2, R3 & R4 Turn ON, while B1, B2, B3, B4, R5, R6 are OFF, this is Group # 5 ON

6- When BOTH #6 Terminals activate ON, at both boards (-/+) Then Coils B6, C, R1, R2, R3, R4 & R5 Turn ON, while B1, B2, B3, B4, B5, R6 are OFF, this is Group # 6 ON

7- When BOTH #7 Terminals activate ON, at both boards (-/+) Then Coils C, R1, R2, R3, R4, R5 & R6  Turn ON, while B1, B2, B3, B4, B5, B6 are OFF, this is Group # 7 ON (Extreme Right Field Location)

As above I have written all #1 to #7 Sequences, which includes that Magnetic Field has traveled from the extreme LEFT (#1) passing through CENTER (#4) until it reaches #7 or the extreme RIGHT.

Also to realiza that on ALL SEQUENCES, Coil C is always ON, Meaning that we can use this Center Coil in order to Regulate the TOTAL Resistance of the Field, no matter where the Field Spacetime Positioning is.

And, as you all know, by Lenz Law, increasing Resistance will lower our Operating Currents (Amps) while keeping the same Voltage V.

Also, when testing, make sure Coil C is checked for temperature increasing, this is very important!!

Regards

Ufopolitics

Post Data: As it is understood the Sequence shown and explained above ONLY travels from #1 to #7 Terminals, and this is just 1/2 Cycle, meaning, that once it reaches #7, then the Sequence starts 'going backwards' or from #7 to #1, these completes a FULL Cycle.

[worldcup]

Hello everyone!!

I am posting here a series of graphics and their respective explanation to help a dear friend of mine (I am not revealing who he is now), and is going soon to be making the Figuera Linear Generator TESTS but with only 13 Sequential Coils instead of 15 like I originally have posted previously.

We have been trying to communicate through email prior, but because of mail threads we kind of get lost or miss images or explaining text, etc.

So, on this platform we will have a much better way to explain and show images, as always could simply scroll back, to review them again. (that was the main purpose I build this website.)



So, on image above I have cleaned up all previous secondary circuits plus test points, leaving only the 13 Sequential Coils and their connection with the N & P FET Boards.

And here I will go, step by step, on how the sequential order works starting on #1 terminals (positive and negative at unison, same time)

1- When BOTH #1 Terminals activate ON, at both boards (-/+) then Coils B1, B2, B3, B4, B5, B6 & C Turn ON, while R1, R2, R3, R4, R5, R6 are OFF, this is Group # 1 ON (Extreme Left Field Location)

2- When BOTH #2 Terminals activate ON, at both boards (-/+) then Coils B2, B3, B4, B5, B6, C & R1 Turn ON, while B1, R2, R3, R4, R5, R6 are OFF, this is Group # 2 ON

3- When BOTH #3 Terminals activate ON, at both boards (-/+) Then Coils B3, B4, B5, B6, C, R1 & R2 Turn ON, while B1, B2, R3, R4, R5, R6 are OFF, this is Group # 3 ON

4- When BOTH #4 Terminals activate ON, at both boards (-/+) Then Coils B4, B5, B6, C, R1, R2 & R3 Turn ON, while B1, B2, B3, R4, R5, R6 are OFF, this is Group # 4 ON (Center Field Location)

5- When BOTH #5 Terminals activate ON, at both boards (-/+) Then Coils B5, B6, C, R1, R2, R3 & R4 Turn ON, while B1, B2, B3, B4, R5, R6 are OFF, this is Group # 5 ON

6- When BOTH #6 Terminals activate ON, at both boards (-/+) Then Coils B6, C, R1, R2, R3, R4 & R5 Turn ON, while B1, B2, B3, B4, B5, R6 are OFF, this is Group # 6 ON

7- When BOTH #7 Terminals activate ON, at both boards (-/+) Then Coils C, R1, R2, R3, R4, R5 & R6  Turn ON, while B1, B2, B3, B4, B5, B6 are OFF, this is Group # 7 ON (Extreme Right Field Location)

As above I have written all #1 to #7 Sequences, which includes that Magnetic Field has traveled from the extreme LEFT (#1) passing through CENTER (#4) until it reaches #7 or the extreme RIGHT.

Also to realiza that on ALL SEQUENCES, Coil C is always ON, Meaning that we can use this Center Coil in order to Regulate the TOTAL Resistance of the Field, no matter where the Field Spacetime Positioning is.

And, as you all know, by Lenz Law, increasing Resistance will lower our Operating Currents (Amps) while keeping the same Voltage V.

Also, when testing, make sure Coil C is checked for temperature increasing, this is very important!!

Regards

Ufopolitics

Post Data: As it is understood the Sequence shown and explained above ONLY travels from #1 to #7 Terminals, and this is just 1/2 Cycle, meaning, that once it reaches #7, then the Sequence starts 'going backwards' or from #7 to #1, these completes a FULL Cycle.

Anything to do with this or him ! - 

[Ufopolitics]

Hello All,

This post is basically dedicated to the member that is going to perform the tests on the Figuera LINEAR Generator next week:

Ok, BEFORE ANY Outputs are LOADED to ANY of the TWO SECONDARIES...

The FREQUENCY MUST BE AT OPERATING SPEED, meaning from 50 to 60 Hertz !!!

Otherwise, if this generator is LOADED BELOW OPERATING FREQUENCY it WILL COLLAPSE (DRAIN) the EXCITING FIELD.

And no Significant OUTPUT will be generated !!.


This is an Electromagnetic Generator, and it works exactly the same way as a Rotary Type works, no matter if there are no rotational parts.

In ANY Rotary Generator Instructions is clearly stated:

GENERATOR MUST BE AT OPERATING SPEED -AND WARMED UP- BEFORE LOAD IS APPLIED

(Europe: 3000RPM's=50 Hz, US: 3600 RPM's=60 Hertz)

Then -depending on load demand- the Old type Rotary Generator will INCREASE AUTOMATICALLY ITS RPM's.

However, in a MANUAL TEST of Linear Figuera Generator, the Test Operator would have to rise Frequency manually and SLOWLY, once the load is applied.

ALL these 'primary tests' should be done with manual regulation increase of frequency once loaded.

Whenever we design and build an 'Automatic Solid State Regulator'' in the future...then it will be a "Plug and Play (Load)" Generator.

And -of course- since on this non moving parts generator there are no negative physical torque generated, the increase of frequency required here would be much less, that is why is done SLOWLY, until it reaches desired Output to satisfy the Load demand.

Regards to All

Ufopolitics

[Ufopolitics]

Hello All,

As adding to my above post...

I will try to explain briefly why this increase of frequency will ALWAYS be required on any Generator based on a Primary Exciter and a Secondary Output, no matter if Field is Physically or Virtually moving.

On a  typical rotary generator, the majority of us knows why this happens, it is easier to understand...it is the same explanation we have learned over and over the years.

As I will 'refresh' this  old knowledge, but, from a different perspective:

Say we have a Home small, single phase Generator...we start its Internal Combustion Engine (ICE) first by 'choking' its carburetor, until we prime it, then restart and go...it starts reaching the 3000 RPM's and since it is NOT LOADED at this stage, it reaches speed faster.

Once its Exciter Field Rotor mantains a STABLE and CONTINUOUS speed, then we LOAD IT...

And, as soon as Generator IS LOADED, we can notice an immediate response by the Engine, it suffers a SUDDEN DROP ON SPEED, until its Carburetor"Governor" (which is like a small rod with a counterweight) kicks in, pushing its throttle lever like pressing on a car accelerator pedal, except GRADUALLY...not like fully stepping accelerator pedal to the floor.

So, above was the Mechanical Explanation...

The Electromagnetic explanation that we all know related to this issue is simply due to Lenz Law, which it holds true and is easy to understand. I will not go in detail, but briefly.

Once we add a LOAD to our running Rotary Generator, at operating RPM's, we simply are CLOSING THE CIRCUIT on the Secondary Output Coils...Then ALL Secondary Coils generate a SECONDARY FIELD, which opposes -in polarity- to the Primary Exciter Circuit, this results as a Negative Torque which suddenly "STEP ON THE BRAKES" of our rotational Field (ROTOR).

Now, this Opposite Secondary Field is GREATER THAN PRIMARY FIELD, basically because it has much less resistance, due to heavier wire gauge, and that fact generates a HIGHER CURRENTS/HIGHER VOLTAGE FIELD, other words, OUTPUT POWER AND FIELD ARE EXPONENTIALLY AMPLIFIED.

In 'Plain Math' a Greater AND OPPOSITE Magnetic Field will definitively 'drain/suck' the smaller Exciter Field, to the point that it could completely CANCEL IT. And the ONLY WAY on a Rotational Generator to COMPENSATE THIS OPPOSITE EQUATION, is to INCREASE THE FREQUENCY, in this case the RPM's.

In our LINEAR FIGUERA GENERATOR, we do not have a Physically Spinning Exciting Field Rotor, therefore, no 'Opposite/Negative Torque' will be generated.

HOWEVER, Lenz Law would still be present on the Figuera Generator!! and it will manifest EXACTLY the same way as on the Rotary Generator, it will TEND TO CANCEL this Virtual, Massless Field!!

The only ADVANTAGE we all have on the Figuera's Generator, is that the requirements to increase speed/frequency DEMANDS MUCH LESS ENERGY SPENDING.

Great advantage being that we no longer need a "Herculean Gas Engine" to heavily turn that 'STIFF ROTOR' against the OPPOSITE FORCES.

But, my main point on this post, is just to let you ALL know, that STILL, ON FIGUERA'S LINEAR GENERATOR, there are OPPOSITE ELECTROMAGNETIC FORCES at play, that we must CONTROL, in order to have a successfull Output, which would be ABOVE INPUT.

Related to the TESTS on the LINEAR FIGUERA GENERATOR:

It is VERY IMPORTANT to measure first- at the OUTPUT SECONDARIES TERMINALS - what I call the 'OPEN VOLTAGE' or 'V Open' (VO) and that is the Voltage Generated at IDLE OPERATIONAL SPEED/FREQUENCY at NO LOAD CONDITIONS.
Knowing the V-Open (VO), then once LOADED, WITHOUT INCREASING FREQUENCY, we read the V-Closed/Loaded (VC) THEN we can obtain our V-DROP (VD), which is simply VO - VC= VD

This V Drop (VD) is our LEVEL GUIDE to raise the Frequency ABOVE VD value until we meet the VO Value while Generator is LOADED...That simple.

Again, I will repeat, that whenever reading Voltage Closed/Loaded (VC) is DONE BY NOT INCREASING THE FREQUENCY, not even touching that 'Dial' !

At the same token, these Three (3) Parameters:
1-V Open (VO)
2-V Closed (VC)
3-V Drop (VD)
Will serve to design our future "Solid State Automatic Voltage Regulator"...simply keeping VD= or > VO value.

Regards to All

Ufopolitics

[Ufopolitics]

Hello All,

Ok, so adding to above post...and again, this are recommendations to the member making tests next week, on a setup which have 13 Sequential Coils.

VO: The REGULATION FOR EUROPE IS AT 50 Hz, which means 50 times per second traveling of the magnetic field on a FULL CYCLE, meaning 50 Hertz is equal to 50 Cycles per second.
On the FIGUERA LINEAR TYPE we are looking at Sequences from 1 to 7 (Half Cycle) then back from 7 to 1 (Completes the Full Cycle once it reaches #1)

It is important to get VO on a level of Voltage that satisfy the intended LOAD DEMAND you are planning to connect.

VD: One important thing to know about Voltage Drop (VD) is that this parameter is NOT FIXED, BUT VARIABLE.
And VD DEPENDS DIRECTLY on the LOAD POWER DEMAND, so, it could be greater or smaller level, as well as HOW MANY MORE LOADS ARE ADDED to the same Secondary Output.

Now, the best way to ADD LOADS to the same Secondary Output IS WITH PARALLEL CONNECTIONS, NEVER IN SERIES!

That is the way our AC Distribution wiring is connected anywhere in Homes or Industry.

Then for a test, is best to have a TYPICAL AC OUTLET with as many single outputs as loads you are planning to connect.

So, if you have say 3 INCANDESCENT BULBS (NOT LED, NOT CFL) to add as loads...set all three bulbs on separate sockets for each, wired to a male outlet plug separately, so you can add first one bulb, measure VD, then add the second bulb, measure VD...and so on.

WHILE ADDING THE LIGHT BULBS DO NOT RISE FREQUENCY!!...In order to be able to know your TOTAL VD, according to the TOTAL Wattage you have added.

The bulbs not need to be of the same Wattage, (Being of same wattage just make annotations and understanding easier, that's all) if bulbs are different watts, then write down for each bulb its specific Watts, to be added to your check list.

So when you have ALL BULBS CONNECTED as LOADS, write down your TOTAL VD...as noticing each time you add a bulb, the total brightness on all bulbs decays.

ONLY AFTER YOU ARE DONE CONNECTING ALL BULBS, is when you START RISING THE FREQUENCY to go EQUAL to your previously known VO...PLEASE GO SLOWLY ON RISING FREQUENCY.

You could blow easily the Bulbs...it would be best to have a Light meter (in Lumens) that way by pluging FIRST your light bulb to  a regular AC Outlet, you know the max lumens they deliver.
Some Light Bulbs have written their Lumens on the box...then you do not need to make the external AC Outlet Test...just make sure whenever you reach the MAX Lumens, DO NOT KEEP INCREASING FREQUENCY, because simply you will blow their filament up...as some bulbs may explode!!...so be careful.

GROUND WIRE: It is highly recommended to add a GROUND Wire from the GENERATOR STEEL CORE, or even could be the END Clamps, AS LONG AS CLAMPS are making contact with Main Steel Core, without any insulation in between.

For the Figuera LINEAR Generator would be best to run TWO GROUND WIRES FROM EACH END OF THE STEEL CORE, then attach them together as just one to go to your AC Outlet Ground Wire.

On a Circular, Rotary Generator we just need one Ground Wire, simply because the Steel Core receives on the same Core Area Both Cycles MAGNETIC IMPACTS, which spreads evenly...NOT SO ON A FIGUERA LINEAR GENERATOR, where you will add Magnetic Impacts of Different Polarization for Each End that never contact each other, like on a circular generator.

On this Figuera Linear Generator, the Magnetic Field travels from one end to the other end of steel core, the Exciter keeps Impacting on one side a NORTH POLE, while on the other end a SOUTH POLE, therefore, we get TWO MAGNETIC DIFFERENT IMPACTS ON EACH OF THE EXTREMES of the Core Length.

Then with two Ground Wires from each end of steel core length, we are capturing BOTH OPPOSITE IMPACTS AT THE SAME TIMING.

Ground Wire must be a heavy, coarse gauge, INSULATED Wire...Like the ones they use on AC Appliances or AC Extensions.

It is interesting to read on an Oscilloscope of two channels the Steel Core Sinewaves...first just from one end for one channel, then read the other end with channel #2...so you get an idea of what I am writing here...

FINAL NOTE: I may be adding to this  post later on...

Regards

Ufopolitics