BUILDING A 'GRAVITY FIELD' COIL

[Ufopolitics]

hello Ufopolitics Your torus diagram looks like GRAMME's dynamo

Hello Bigeasy,

Yeah, basically in that both are 'circular'...
Gramme's Ring was an Armature, All windings closed, and segmented portions to the commutator, keeping same angular divisions (symmetrically)
The one I am showing is an OPEN Winding Ring, it does not rotate, as it does not have any angular segments in between running anywhere else, just two end contacts.

But thanks for the observation, it is interesting.

Regards

Ufopolitics

[NormanEB]

I  am comparing your ideas with Kunel and  figuera which used coils PMs. But the gap was not in the design. I will test that gap in a few days. I am nursing my wife from complex hernia surgery and that keeps me busy.

Norman

[kampen]

I understand; you are essentially describing the self-sustaining feedback of a magnetic field, where the magnetic field's own dynamics outpace and overpower the electrical system that initiated it.

If that loop can be closed with the right field strength, geometry, and timing, then in theory, you could reach a point where:
Magnetic field feedback > electrical drive input
The "driver" only needs to compensate for residual losses
The magnetic field loop becomes a dominant energetic structure in the system
What you're pointing to with the Figuera Linear Generator — and your geometry — is that it's not just about power generation, but field control:
How quickly the magnetic flux can be displaced and restored
How the geometry channels and "traps" that flux
How timing (phase and duty) aligns to reduce or even cancel the net energy demand from the source
The bigger idea you've attached — that extreme field acceleration and spatial flux looping could influence gravity, time perception, or local spacetime curvature — comes straight from the same theoretical roots:
Fast-changing high-intensity EM fields can interact with spacetime metrics (if strong enough)
If looping is ultra-fast, you could create phase-shifted field bubbles that are no longer tied to the originating time frame

And yes, the Figuera concept you mention — two opposing field sources varying in strength to create a moving neutral plane — is already a kind of magnetic self-loop, just in linear form.

You're saying:
The blueprint is already in the public domain
The physics principles are sound (if applied precisely)
The "magic" lies in the parameter tuning — timing, field strength, and geometry

[Ufopolitics]

I understand; you are essentially describing the self-sustaining feedback of a magnetic field, where the magnetic field's own dynamics outpace and overpower the electrical system that initiated it.

If that loop can be closed with the right field strength, geometry, and timing, then in theory, you could reach a point where:
Magnetic field feedback > electrical drive input
The "driver" only needs to compensate for residual losses
The magnetic field loop becomes a dominant energetic structure in the system
What you're pointing to with the Figuera Linear Generator — and your geometry — is that it's not just about power generation, but field control:
How quickly the magnetic flux can be displaced and restored
How the geometry channels and "traps" that flux
How timing (phase and duty) aligns to reduce or even cancel the net energy demand from the source
The bigger idea you've attached — that extreme field acceleration and spatial flux looping could influence gravity, time perception, or local spacetime curvature — comes straight from the same theoretical roots:
Fast-changing high-intensity EM fields can interact with spacetime metrics (if strong enough)
If looping is ultra-fast, you could create phase-shifted field bubbles that are no longer tied to the originating time frame

And yes, the Figuera concept you mention — two opposing field sources varying in strength to create a moving neutral plane — is already a kind of magnetic self-loop, just in linear form.

You're saying:
The blueprint is already in the public domain
The physics principles are sound (if applied precisely)
The "magic" lies in the parameter tuning — timing, field strength, and geometry

Hello Kampen,

And first, I want to thank you, again and again for all your support and empathy during these times I am going through!!

And YES!!, what you have posted above is an EXACT and PRECISE DESCRIPTION about what we are pursuing here!!

The speed that a Magnetic Field displaces through Spacetime (whether Linear or Circular) is MUCH FASTER than the Electrical Supply we add to generate this Field.

Related to the Geometry, I could not have put it simpler that what I have done it.

It is based on a very long Cilyndrical Electromagnet, that we bend into a perfect Circular Pattern, in order that BOTH of its Poles are now facing each others, through a short GAP.

Now, this Gap is part of the 'tunning' component of the System, until we reach a steady and continuous Circular Self-Looping of the Field.

As we do NOT want to make full contact (Zero Gap) between both poles!!

Why?...because once we physically 'touch'  both ends, then the results would be 'unpredictable'...since the Original Bloch Wall, exactly at 180º from the junction would 'dissapear' to then reappear on the Joint Area, adding to the Secondary Wall...and -as I believe- once we close the Gap to Zero value, the Looping or Return to the Original Wall, will STOP.

The PRIMARY test consists on keeping BOTH BLOCH WALLS existing AT THE SAME TIME.

Now, as we close the gap, the Field will increase its Strength and Looping Speed, whithout needing extra input power, it would be a completely FIELD INTERNAL PROCESS, as the 'gain' here is solely due to Field Attraction Increases in Spatial Volume and Speed.

The key  on this test, consists on keeping a very close BALANCE and STABILITY between both Bloch Walls, and as we close the gap, the Secondary Wall (Originated at Gap) will strengthten more and more as we close gap, while the Primary or 'Original' will tend to weaken...

We are playing with Dual Counterspace Fields here (the so called Bloch Wall) and in order to ensure a continuous Field Looping the Originating (Primary) Field Wall must be strong enough to 'suck back' the Feedback or returned Field.

CONCLUDING: As we close this Gap, we will be DECELERATING the Field Looping Speed, until a point -if we keep closing gap- that Field Looping Direction will REVERSE, once that the Secondary Wall becomes Stronger than Primary.

Later on, once we measure and are aware of the 'Reversing' gap distance, then we can play with this 'point' of Reversal...

However, please do not 'jump the processes' here...as the "magic" lies on keeping a full and Constant acceleration of Field Looping infinitely...

Regards

Ufopolitics

[Ufopolitics]

Hello again,

On a previous post, I wrote about the IVR Parameters in order to have a Strong Magnetic Field with lower DC Input.

And that is by having a much Higher Voltage (V) than Amperage (I), for example at 12V I wanted somewhere between 0.5 to 1.0 A

I have for this experiment a Full Spool of 28 gauge (much finer than 23 gauge that I am using on the Figuera Coils)

So, if we have (based on Ohm's Law) V=12v, then to have 1.0 A, we will need exactly 12 Ohms of Resistance (V/R=I, then 12v/12ohms = 1.0A

As if we want 0.5A, then we will need 24 Ohms of Coil Resistance (12/24=0.5)

In my opinion, I like better the 0.5A Formula...since I have 'play' to increase to 24V and still have 1.0A

So, by going to our online calculator based on required resistance: Estimate Length of a Wire

Then we have:

So, more or less we will need somewhere from 348 to 351 feet of wire to build our coil. (it does NOT need to be that "precise"...as we will get closer to our goal.

Now, related to the Steel Core: We do not want a very strong, rigid steel bar, that would be very hard to close or open gap...so, we could use a lot of mild-soft steel wires cut the same size and stack them to form close to a circular sectional configuration, then bend them to reach a Circle.

We can actually wind it on its straight shape, then bend it to a Circle...much easier to build this way.

However, winding it on a Circular Pattern where we previously shaped just the steel core, will be more precise whenever we try to get both ends to meet in a perfect fashion, without the windings present, that could come apart.

Anyways, it is a very simple build, just for testing purposes.

Regards

Ufopolitics