WELCOME ALL NEW MEMBERS!!

[Maxwell]

Hello everyone, thank you very much for accepting me in this forum. I'm from Spain, and I've been looking for a machine that really works for many years. I have had many experiments carried out without success, I think like all of us who are here. After so many years, I have learned that something is always missing. It seems like we already have it, but one small thing is missing, which becomes a big problem. I hope that Clemente Figuera's machine works, it is real OU. Thank you for uploading the last video in Spanish, I don't speak English very well, and the tests you have carried out on this system on YouTube, I don't understand very well, due to the language. 

[Ufopolitics]

Greetings, my name is Alex.
I live in Australia.
I am a jack of all trades.
I got sucked into the overunity vortex when a friend told me about overunity documentary she saw in 2017. Not sure which documentary. I became obsessed with theory of gravity powered device then started to read about popular OU myths. I learned some electronics and wasted a lot of time with Bedini Bearden cult. I have made hundreds of experiments but have little to show for it. I have read through thousands of pages of ego wars at all OU platforms. I Never achieved self runner. Had small OU with tesla coils but unreliable tuning and not enough extra energy to loop. I have motivation and some ability to build things but need to spend my precious time more wisely than in past. I wasted a lot of time and good materials on stupid experiments in my ignorance. Best thing to come out of OU community for me was learning to use sea water as fertiliser for agriculture and horticulture, recommended when I was searching for low energy desalination tech.
Most recent OU experiments around parametric converters, parametric excitation with variable inductance. My youtube channel...

https://m.youtube.com/watch?v=wZ_bMs_uVeA

I hope I can help the cause here. I wish everyone here more freedom and more peace. May you all find what you seek!

Hello Sandy and Welcome aboard!

Thanks for filling out your Member Profile accordingly.

I also saw your video...nice build, and I am sure you have the capacity/ability to build a Figuera Generator, and even to "upgrade it" later on...

I already included you on the Builders Group and Identified Members here.

Best Regards

Ufopolitics

[Ufopolitics]

Hello everyone, thank you very much for accepting me in this forum. I'm from Spain, and I've been looking for a machine that really works for many years. I have had many experiments carried out without success, I think like all of us who are here. After so many years, I have learned that something is always missing. It seems like we already have it, but one small thing is missing, which becomes a big problem. I hope that Clemente Figuera's machine works, it is real OU. Thank you for uploading the last video in Spanish, I don't speak English very well, and the tests you have carried out on this system on YouTube, I don't understand very well, due to the language. 

Hola Maxwell,

Es bueno tener aquí a Maxwell en persona!!

A ver, háblanos de las Equaciones Quaternianas que hiciste hace como 200 años atrás?

Y tengo muchas preguntas...


jajajaja...es broma, Bienvenido a este Foro!!

Puedes comentar y preguntar lo que desees en el Tópico en Español:

El Generador Figuera 1908, La Bomba Magnética Lineal del Éter, Revivida

Entiendo que tienes algunas preguntas sobre las Pruebas que hice en video...adelante


Saludos

Ufopolitics

[Ufopolitics]

Thank you very much for accepting me in this forum.

My name is Emilio Leal, I know you don't know me but we have all been following the same thing for many years, I saw the old
forum from time to time, there I saw evidence of ufopolitics and also of marathonman and the famous part G.
I am from Valencia, Spain, I have a slight knowledge of Arduino and mosfets which allows me to make some small assemblies.
In Spain we have a WhatsApp group and there some of my friends are Hilario from Hypermotor and Vortios, a friend who
is a very active person trying to replicate Figuera from his prospective with very interesting experiments.

Personally, I am not a great builder, I confess, but I do record videos with my theories and ideas about FIGUERA.
All this is a thing of the past because it seems that UFO has finally revealed the secret.
It seems to be a group of electromagnets activated sequentially, keeping the previous ones activated and in a double direction.
I know it is bold on my part and perhaps this is not the place, but looking at the oscilloscope waveform, it can be seen that when switching the first inductor it generates a lot of output, and the following switching, despite consuming the same amount of each inductor, do not generate as much. exit. I think I know why and how perhaps to achieve that each switching of each inductor after the first, the output as if it were the first. It is not my intention to contribute noise and I will only speak when I have something that I consider can help, you have already achieved the most difficult thing, ufo, really thank you very much for sharing.

In the thread I explained how each inductor could give the maximum.

Hola Emilio Leal!!

Disculpame que no te había reconocido, quizás por fijarme solamente en tu nombre de miembro...

Eres muy bienvenido acá!!, y sé que nos puedes dar consejos muy útiles!!

Por favor, quiero que te sientas cómodo en este sitio!

Puedes comentar directamente en Español si deseas, o te sientes mejor expresándote de esta forma.

Te incluyo en el Grupo de Miembros reconocidos para que tengas acceso a los Topicos de Construcción

Y si necesitas algo, déjame saber en mensaje privado.
También he creado un Tópico sólo en Español en este enlace: El Generador Figuera 1908, La Bomba Magnética Lineal del Éter, Revivida
Puedes escribir allí, o si deseas puedes abrir tu propio Tópico debajo de Figuera...o en cualquier parte que desees.

Un Saludo cordial

Ufopolitics

[GreyWolf47]

UFO, I have a very good friend of mine from Texas that is an active builder that I would like to recommend for the builder site. He is presently working to duplicate the LIBERTY ENGINE#3 and I have been helping him with advice and understanding in ways to test the build. How do I introduce him to this group? Thanks Gene