Open Source Free Energy & Over Unity Forums...and If You think none of these terms are real, they do not exist, or is just fiction, then PLEASE>>DO NOT ENTER!!



Free Energy will change the World - Free Energy will stop Climate Change-Free Energy will give us hope,
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Words from Stefan Hartmann/Owner/Admin of Overunity Forum
I really love those words from Stefan, reason why they are here..
Overunity.com Forum is online at Overunity.com Archives

FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

Started by Ufopolitics, Nov 19, 2023, 03:39 PM

Previous topic - Next topic

0 Members and 34 Guests are viewing this topic.

Ufopolitics

Hello All,

Ok, like I wrote on previous post, about the advantages on Rectangular versus Square Cross Section Cores, here is an image that relates directly to the error I've made by cutting exactly two inches shorter the Total Length of Steel Laminations:

CALCULATING_VOLUMES_1A.png

First, what is reflected on BOTH Images are just the CENTER CORES, where the Main Secondary Coil, plus All (15) Sequential Ring Coils are installed.

Therefore, the Two Side Second Secondaries plus their steel cores are NOT SEEN here.

1- The Top Image is the Square Cross Section (1.5 in X 1.5 in) Steel Core like I have shown previously, having a CENTER CORE Total Length of 11.25 or 11 1/4 Inches.

2- The Bottom Image is the ACTUAL Rectangular Cross Section (1.5 in X 2.0 in) Steel Core that I have elongated vertically, by just adding more Horizontal Laminations.

As its Total Length is 2 inches LESS than Original Core, or 9.25 in.

As you can see the TOTAL CUBIC VOLUME IS GREATER on the Rectangular Core than on the Square Steel Core...by exactly 2.45 cubic inches difference.

And we have a much Shorter/Compact Generator Assembly.

Plus, now our Second Secondaries Cores would also have a larger cubic steel volume than on the original Square Core.

There is more related to the development of Steel Cores Geometries...but for now, in order to keep working on the already cut model, I will leave it for now, as I want to test first this setup I am working on at the time.

Just wanted to show this example in order to demonstrate that by just elongating the CORE HEIGHT Half Inch (0.5 in/13 mm) for the Total Length, we get an increase on Cubic Volume, even though the Total Length (9.75 in) is Two Inches LESS than original length (11.25 in).

Regards

Ufopolitics
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

Hello to All,

Ok, I made a short video to show some tips I use to make a nice alignment for drilling bolt holes on Clamp Brackets:


And here is an image of Two Clamp Brackets that will make Pair #1 being drilled together on CNC Bench Drill.

CLAMPS_BRACKETS_PAIR.jpg

I use Two Vise grip pliers to clamp them together and set on drill bench vise.

This clamps design requires a pretty accurate alignment, in order to fit and compress laminations properly.

Regards

Ufopolitics

Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

Hello to All,

Ok, All Clamp-Brackets are bolted on:

PERSPECTIVE_ALL_CLAMPS_BOLTED_ON.png

ALL_CLAMPS_BOLTED_SET_MEASUREMENTS.png

And I do not know if you all have noticed...but is generating a "slight belly" on the center area, after all clamps have been bolted on.

Normally there are a few solutions for this issue, I will go for the simpler one and less "bulky"...

I explain that on video below:


Regards

Ufopolitics
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

Hello All,

Ok, I got the 2.0 inches height all across, I only needed to add like eight laminations.

I use Two Vise Grip C-Clamps on Two Aluminum Angles, to compress at same height (2.0 Inches) all along the core:

CLAMPED_CENTER_LAMINATIONS_AT_2.png

Then I soldered all laminations on four vertical weld run.

C_CLAMPS_VISE_GRIP_COMPRESSION.png

ALL_SOLDERING_DONE_CLAMPS_OFF.png

A video to show it after all clamps removed:


It is getting there...

Regards

Ufopolitics
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

Hello All,

Ok, I have the Steel Core Laminations all soldered to form one solid single piece/component:

FULL_STEEL_CORE_AS_ONE_PIECE.png

As you can see, I added a few more soldering runs plus also on the two End Faces.

Here is a short video to see it separated from its clamp brackets.


Regards

Ufopolitics
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci


Open Source Free Energy-Over Unity Systems Research/Development/Disclosure/Discussions