FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[Ufopolitics]

Hello to All,

Now, this System I am working now, is very STABLE, related, mainly, to Input Currents...why?...because the Resistance remains also stable, the same, FOR THE WHOLE SYSTEM.

However, INTERNALLY, between Sequential Coils plus Fields 1 & 2, currents and resistance varies...and so the Magnetic Fields 1 & 2 also vary their Intensity, in a UNISON movement.

AGAIN, without affecting the Total Resistance of System as a WHOLE...SO, Input Currents, remains STABLE.

These INTERNAL changes in Resistance and Currents, does NOT affect the Total Input to the System, simply, because Total Resistance does not change.

EXCEPT, when I start dialing up in speed/frequency, then Input Current starts to drop...but Output keeps increasing...and this is the "perfect scenario" that we need.

Now, ALL Dynamo's (and even ALL Generators now) have a LIMIT, to generate voltage-currents for the load you add...and if you OVERLOAD Dynamo, BEYOND its CAPACITY... it just quits, collapses, supplying power...

Another thing that we all, need to realize...is that our Secondaries work directly with our non-rotating armature coils, PLUS with our Fields. Basically, whenever we add loads on secondary.

When we add loads to our secondary(ies), a Process of EXCHANGE based on DEMAND-SUPPLY, between Inductor-Induced, starts to take place.

This is NOT new, every Generator have its "limits" in "MAX LOAD"...ALL of them!!

Now, the "tighter" Both Systems (Inductor-Induced) are operating, the better response in that relationship of Demand-Supply would take place.

Anyways, after I have finished all my sequential Coils, I will start working on a better Steel Core Design, for these type of Systems...and I already have that figured out...just need to finish the 3D CAD images...to take it to reality.

Regards to All

Ufopolitics

[greybeardmike]

Ufopolitics,
For clarity.  I do not want to disrupt your testing or your train of thought.  I'm just posting as part of the discussion.

If I get something of enough value built I will start a thread to explain what I have done.

I have ordered some safety diodes.  I don't know why I didn't have them on there before.

Please don't let me sidetrack your progress.

greybeardmike

[Ufopolitics]

Ufopolitics,
For clarity.  I do not want to disrupt your testing or your train of thought.  I'm just posting as part of the discussion.

If I get something of enough value built I will start a thread to explain what I have done.

I have ordered some safety diodes.  I don't know why I didn't have them on there before.

Please don't let me sidetrack your progress.

greybeardmike

Hey, do not worry -at all- Mike...I will not get sidetracked...

Please do, open your own Topic on Builder's Group anytime you want...and there you may get some help from other Builder's working on similar electronic driving setup, as you have.

But you must expose all your circuits, Programs to Arduino, etc, so other's can see where the possible errors exists.

The more Open we are, the better and faster the solutions will take place, when working as a Team.

Regards

Ufopolitics

[Ufopolitics]

TESTING FIELD 2 COIL, COMPLETELY ISOLATED FROM EXCITER SYSTEM

Hello to Everyone,

I guess I am in a Full Time basis here...24/7...lol.

But I think this point is very important to share with you all...

I just did the test that I was mentioning on my previous post.

Which is to completely disconnect Field 2 Coil from the rest, as also from Negative Input...then I reconnected Coil #7 Start, back to commutator point 8, this way we will keep loop closed.

Output from Secondary "y" is completely disconnected, meaning, no light bulb, not measuring...both terminals are totally loose.

So, Field 2 Coil is COMPLETELY ISOLATED from the whole System, so, Field 2 Coil is just acting, as another Secondary...

On the Two Terminals from Field 2 Coil, are connected the Scope Probe Channel 2, Blue, and its ground. Plus, the AC Meter reading its Total AC Output...plus Caps that I show on video.

My conclusion, is that while operating together, Both Fields 1 & 2 keeps assisting each other's, in a type of "Self-Induction", or it could be better called as "MUTUAL INDUCTANCE EXCHANGE" during its operation.

Furthermore, I need to keep evaluating and developing this fact, perfectioning it, in order to achieve a completely Self-Feed Exciter System.

Regards to All

Ufopolitics

[Ufopolitics]

Hello,

As I also forgot to mention, and I did not want to Edit same post, as You may miss this...

But, this is not any kind of "magic" here...Dynamo's from the 19th Century did this same "Self-Feed" effect all the time, and there we run on different categories, as "self-excited" or "externally-excited"...that after gaining the operating speed, than you disconnect that external Input...and it will keep running by itself.

In Hawkins Book, it mentions that as Armature rotates, and reach the rotational speed required, it will start "filling up" both Stator Fields...

Also, Figuera mentions the same thing, at the end of his explanation, on his 1908 Patent, that after Generator is operating, generating power, then you can remove that external supply that got it started...and machine will keep running by itself.

I remember exactly, when Figuera uses the term in Spanish "corriente de cebo" which means "bait current", to define the exact term of this external power role...a "bait" current supply.

Even though, that term is not the adequate one, a more correct "technical" term, would be a "priming" current supply...like we must always "prime" a completely empty hydraulic pump, with whatever liquid it pumps, before start running it, at full working speed.

In our case that "liquid" we are pumping...are "electron liquid flow"...

Regards to All

Ufopolitics