FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[skybiker63]

my electromotor engineer says that in his opinion it is not possible to generate real power with a simple steel pipe in the core.
He thinks we need a core of dynamo metal sheets for that. What do you think ?
He is a very experienced long time motor constructor.

[Ufopolitics]

my electromotor engineer says that in his opinion it is not possible to generate real power with a simple steel pipe in the core.
He thinks we need a core of dynamo metal sheets for that. What do you think ?
He is a very experienced long time motor constructor.

Hello Skybiker63,

Your Electromotor Engineer is kind of "exaggerating" a little bit, about his opinion of "not being possible to generate real power" because of using a solid steel core, instead of laminated iron sheets.

All the difference between solid and laminated iron cores, is to reduce, the parasite currents also known as "Eddy Currents"...which are still generated on laminated steel...we are just reducing, and aligning these parasitic currents to predominate in the "in-betweens" of the laminations.

These Eddy Currents are never higher than the Currents Generated by the Exciter System...

One very old and up to know existing proof of this wrong concept, is the Claw Rotor (Exciter System) from any vehicle Alternator out there...is made of two pieces of Solid Iron...and it can produce up to 200 Amps...and more.



When we get an Over Unity Device...these "eddy currents" are really not to worry about...However, if we get laminated steel, of course it will improve the whole system in a small percentage though.

Thanks for your question.

Regards

Ufopolitics

[Ufopolitics]

REMINDING OF MY METHOD ON FIGUERA, THAT HAS BEEN UPLOADED IN MANY PUBLIC VIDEOS ON YOUTUBE, AND IS TO BE REPLICATED HERE AND ANYWHERE.

So, above is a simple Diagram of what My Method of Figuera Generator is, to be Replicated on this Website and Builder's Group...or anywhere you want...this an Open Source Project!!

The Coils Sequence is simple: [N>1, 2, 3...n>]<>[<n...3, 2, 1<S] and "n" means that you can use as many coils in your sequence as you desire...and that would depend on your switching controller capabilities...,

Now, I understand that you may vary some of the components above and is totally about your desire and will.

HOWEVER, THE BASIC DESIGN ON THE SEQUENTIAL EXCITER COILS GROUPS, SET IN A SPACETIME LONGITUDINAL WAY, THAT PART, IS NOT TO BE CHANGED BY ANY MEANS!!

THESE SEQUENTIAL COILS, ARE IN CHARGE TO EXPAND AND RETRACT THE MAGNETIC FIELD(S) LONGITUDINALLY ALONG THE MAIN, CENTER STEEL CORE.

Now, how you build these sequential coils, is totally up to you...you can make them in a bifilar configuration, or individually for each coil...just make sure polarities are correct!! I have repeated here to exhaustion, that N<>S DOES NOT WORK!!...So, use your judgement call, use tools to know field direction, Polarization, etc,etc

What wire gauge you use?...that is totally up to you, and your expertise on these fields...

On the image I have shown ALL Possible Secondaries that you may apply on your setup, Now, if you do all secondaries with same gauge, then, you could add them in series to obtain a single Output.

Or you can make ALL Type of Combinations there...as just use the Side Secondaries (y3 & y4) for specific purposes...or the Inner (y1) and Outer (y2) with same gauge to be connected in series to obtain a single output...whatever way you like.

Or just start by using only the inner center secondary (y1) as the First one for your Output testing's...

About the Steel Core Geometry and Material? that is also up to you as well, this Method could be built in almost any geometrical Extrusion form, like Square, Rectangular, Round, Elliptical, etc.

It could be Solid Steel or Laminated Steel (better)

The Outer Steel Plates are just to Amplify Output gain, and Compress/Support All Coils together, attached by a single bolt to center core.

I BELIEVE MY DRAWINGS, MY VIDEOS, ARE VERY CLEAR, NEAT, CLEAN, CAD GENERATED IMAGES, SO, IT IS VERY DIFFICULT NOT TO INTERPRET THEM PROPERLY, AND YOU DO NOT NEED TO BE A "GENIUS" TO UNDERSTAND THEM!!

**************************************************************************************************

And now I have to bring up, a specific incident, about a Builder Member here (GreyWolf47), saying he was "replicating" my method*...and then he built a completely different setup than mine, where sequential coils were just "PILED UP, ONE ON TOP OF THE OTHER"...to form some kind of "amorphous mass" of copper wires, that DID NOT FOLLOWED THE LONGITUDINAL, PROGRESSIVE TIME SEQUENCING, THAT I HAVE BEEN SHOWING HERE SINCE DAY ONE!!!

THAT WAS NOT MY REPLICATING METHOD!!

Now, the reason why He decided to build his setup that way, hits me...and I am not going to start "speculating" about that...

But I brought this incident now, to explain why I have removed ALL of his Posts, related to His Concept, which has absolutely NOTHING to do with what I have presenting here from day one that I created this Website.

So, I simply remove them all from this Topic, Mainly, NOT to confuse My True Replicating Members and Builder's here replicating my True Method, or anyone following My Topic here!!

All his Posts were not deleted, But Transferred in an Orderly manner, to His Builder's Topic, along with all his Videos and Images...

I believe I owed You all, an explanation for that incident here, on this specific Topic.

I love all things clear, blunt, and up front!!

Regards

Ufopolitics

[Ufopolitics]

Hello to All!!

What a beautiful day!!

I just came back from a Time Travel trip, I made back to the "DC Dynamo's era" from the 19th Century...thanks to old books that are still available, and they are very well written, illustrated and clear explanations...

The thing is simple...You WILL NEVER, EVER, understand Figuera's explanations, diagrams, etc..no matter if you speak his Native language, no matter how much you know about actual, modern electricity...if You do not make that trip to the past...over 100 years back!!

And so, now I understand Figuera's way...perfectly well!!

When Figuera refers to "las Espiras del Inducido" (Induced Spirals)...first thing that comes to our minds, is the Induced coils that are located ON THE STATOR, that are on any typical AC Generator, or Alternator...right?

Well NO!!...In a DC Dynamo, from the 1800's to earlier 1900's...the Induced coils were the ones on the Rotor Armature!!

When this Rotor Armature turned, rotated, they "cut" the lines of force between the N-S EXCITER FIELDS on the Stator...so these terms swapped entirely related to an AC Generator, 180º!!

On any typical, common, AC Generator or even an Alternator from the 1960's up to now...the "Exciter System" is its Armature-Rotor!!...and the "Induced" are located on Stator, Static...

So, this is it people...such a silly confusion of terms...prevent us from making the perfect Figuera for over 115 years.

Please do not worry, still "My Method" prevails, just will have some magnetic chains arrangement changes...

In other words...that "R Box" Figuera wrote on his patent...were not referring to "resistors box"...BUT to the "Rotor Box" where the "induced spirals" are located...the Rotary Coils, now- after Figuera's Matrix Decomposing a DC Dynamo from those times...

I have to put together some graphics...as explaining details...as of now I am doing a lot of testing on this setup.

Regards to All!!


Ufopolitics

[Ufopolitics]

THE METHOD # 2, TO BE DISCLOSED, IS EXACTLY CONNECTED, AS FIGUERA PATENT IS.

Hello to All,

I want to clarify that the method #2, I have started to explain on previous Post#114, and that I will keep working on as of today...is based ALSO on THE MAIN STRUCTURAL CONCEPT, that I have disclosed here at the beginning of this Topic:

As well as on my Two YouTube Videos in English and Spanish...

The only changes are:

1-That, it is Connected from Induced Spirals in the R Box to Commutator, exactly as Figuera has displayed on his Patent back in 1908.

2- The Magnetic Arrangement is now: N/S-N/S-N/S for Stator Fields (Primaries) as well as Induced Spirals (ring coils)

3- Induced Spirals have the same Geometrical shape (as ring coils) as of previous Method #1

This Method #2 is still being under testing...I have not finished it yet, as I have to make new seven ring coils, with higher resistance and finer wire (23 gauge) than previous coils...

But, so far, it is the same way that Figuera proposed to be done on patent...so far the preliminary tests I have conducted, are very promising, the Input Amperage is reduced considerably, while the Output Sinewave is a clean, typical, smooth AC Sine...very light sparks on commutator/brush, like running a smooth dc motor...according to the same movement that is on the Figuera Original Sequence, the same jumpers on commutator.

I am very happy with this new method so far, mainly because it adheres exactly as Figuera Patent was...let's see how it develops.

Regards

Ufopolitics