Open Source Free Energy & Over Unity Forums...and If You think none of these terms are real, they do not exist, or is just fiction, then PLEASE>>DO NOT ENTER!!




Free Energy will change the World - Free Energy will stop Climate Change
Free Energy will give us hope,
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Stefan Hartmann/Owner/Admin at overunity.com
I really love those words from Stefan, reason why they are here..
and sadly, whole site now on "Read Mode Only" due to Stefan's illness


FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

Started by Ufopolitics, Nov 19, 2023, 03:39 PM

Previous topic - Next topic

Art Z., bilalben and 52 Guests are viewing this topic.

Ufopolitics

Hello to All,

I started working on Clemente Figuera project around 7-8 years ago...my videos show all the attempts made.

I recently gathered those related videos, (some were "private" because they were shared only between Members building it at Energetic Forum) and then created a Play List:

UFOPOLITICS FIGUERA GENERATOR PLAYLIST

I highly recommend NOT to waste your time watching them...As these are all failed tests.
It was just done to show all attempts done without any major success at all, as also a Time Stamp for the records.

I used Bucking Coils idea (N<>N) or S<>S...No luck.
I spent a lot of money ordering Toroid cores, tons of brand new spools of enameled wire for coils plus building the "Part G"...it did not work either...
I spent time and money in high wattage resistors, according to measurements required...nothing...
I made a lot of Animated graphics to understand how this is "supposed" to  work...

For Jesus Christ sake!!, does it takes that much wasted time, efforts and money to realize either this setup will NOT WORK...OR that We were all wrong from the beginnings?

For all of you that are on the same page...do not feel bad...we learned a lot or a thousand times and attempts it does not work...after all, we are not alone...the Figuera Patents, including Buforn's dates back to more than 115 years ago...and absolutely NO ONE have been able to prove it does work as expected, as described on all their patents.

But here, after close to ten years ago, three days back...by reviewing my videos, basically the graphic animated ones...I finally understood where we went wrong...big time wrong.
It is a very slight "Structural Wrong Geometry Interpretation"
It was NOT a Translation error from Spanish to English...My Native Language is Spanish, and I have gone over and over on ALL original documents written in Spanish.

When Clemente Figuera originally put together his 1908 Patent and Drawing(s)...He refers to "resistance" as "Espiras de Resistencia" (Resistance Spirals) inside a box, He named "R"...and He refers to it as "drawn for ELEMENTARY/UNDERSTANDING purposes only"...which means "NOT EXACTLY" the way it goes FOR REAL on his CIRCUIT...
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

By the way...

Please, do not keep on trying FIGUERA SETUP in a ROTARY FASHION of Virtual Fields...it will never work!!...I will tell you why:

On all the Rotary System I tested, there was a main issue, when I accelerated the Controller, the Output started to decrease, instead of gaining value.

Now in a straight line steel core, Fields are generated acting like a Piston Pump, one at each end. Let's call it like Figuera did, Part N and Part S, as the main Primaries.

They actuate in a Reciprocal way, so when one is fully displaced or expanded, the other one is retracted to its minimal capacity, and so on and on. They both travel within the same linear mass steel core, so Field never needs to "jump" from one mass of steel to another (even within same steel stator core) like in a Rotary System.

I know this all sounds "too familiar" and some of you may have tried these "scenarios" many times as well...but there is "a way"...only one way, of making it work superb!!

I have come to the conclusion, that making the Magnetic Field Spectrum jump or "mutate" into a "cold" (not magnetically oriented mass) like I have done in Rotary Systems in the past, it does not work -as well- basically, whenever we accelerate (increase frequency) trying to get higher gain at output. Field Spectrum can travel at speeds higher than light, however, the steel mass takes its "sweet time" to develop a magnetic domain orientation...So the proper "Sync" is lost the minute we accelerate field beyond mass response.[/b]

This will never happen in a straight line of steel mass core, where both fields are traveling -in a linear fashion[/color]- at different space/timing, the steel mass would always be oriented in one linear sense, no matter if we just change linear directions.

Ufopolitics

EDIT 1: And do not worry, this "Method" is not complicated at all!!...it is so simple you would not believe why we did not try it before!!
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

Ufopolitics

FIGUERA'S 1908 PATENT...LEGAL DISCLAIMER

At the time Figuera wrote his Patent, there were no "Claims" that required to be cited at the end like any contemporaneous patent does...However, Figuera aligned his designed patent into a "Block Diagram" type system, referring to "all parts" as "Elementary" cited: which "not necessarily" go exactly the way they should be on the real prototype.

If We follow this pattern of parts, we will have:

1-Part "N" and Part "S" as the Primaries.
2-Part "y" as the Induced.

And up to here is very common as any Generator "now and then" had these parts on...

So, the "Novel Parts" to any existing Generator on Figuera are:

3- Part "R" defined inside a "Box" which he describes as "Espiras de Resistencia" (Resistance Spirals)
4- Part "G" as He describes "the controller", ran by a small motor and just one brush, which does not requires effort to operate, as all it does is like a "Rotary Mechanical Switch".

So, this are the Four Basic Parts for Figuera Generator...not more no less.

Nowdays, with all these four parts, we could put together a -very simple- Block Diagram, for a new concept Patent, which will make it for ALL CLAIMS required by now.

As Figuera recites on his final paragraph on this patent, that "any similar system that uses similar methods will fall into this main design and would be protected by its patent laws.

Which means that we now can move or re-arrange all these "boxes" off a Block Diagram...and still be using his method, no matter if we use as Part G, as a "Fancy" Solid State Electronic method for switching...it is still within the scope of original patent...which by now, is completely Public Domain, and out of any "Legal Liabilities".

However, since this patent(s) have been on Public Domain for close to a Century...this makes it "Not Patentable Status" if anyone will try to "run" to USPTO, trying to file an App, with a similar device, which will have the LEGAL ESSENCE of this Patent.

Ufopolitics

FIGUERA'S_BLOCK_DIAGRAM_RESIZED.jpg
Principles for the Development of a Complete Mind:Study the science of art. Study the art of science.
Develop your senses- especially learn how to see. Realize that everything connects to everything else.
―Leonardo da Vinci

skybiker63

We all should support the great engineering from UFO   :D 

ronee




Open Source Free Energy-Over Unity Systems Research/Development/Disclosure/Discussions