EEG_EM_New_Technique_TRANSVERSE_FLUX (TF) (Provisional Patent Applied for)

[Classic]

SolarLab, i wonder if you can use the software to simulate and find out what is the threshold for resistance to be set at maximum in your electromagnet coils and if you can adjust this resistance by length of wire just under the threshold by few ohms and another simulation where resistance will be tuned down to half of the threshold ?

Is there any certain distance between electromagnets that need to be preserved ?
Also, as far as info provided until now, number of turns for secondaries do not influence the output in a sensible way but, did you find out if the perimeter formed by secondary windings have any influence on the output ? Can you use less or more primary coils on the same magnetic path ?

Is it there any opportunity to analyse magnetic flux only or separate and than analysed in conjuction with electric flux ?

Also, if you use AC instead of DC you don't need to switch polarities, just pulsed AC is needed, so your system will be much easier to be replicated, cheaper and possible more efficient due to less losses in additional components. See https://youtu.be/kH3OmJ6SpnU?si=nLDGm3CYQbdNMfoL minute 15:44 or original paper of Patric Kelly.

Some interesting chat where a mag amp is described and obsesive pushed to new tech which cannot match exact performance of a traditional Magnetic Amplifier, also capabilities to describe a patent of Olivier Heaviside and the patent do not exist, even if it is referred to by many other.
Anyway, this is just an informative discussion related to one of my devices.

If we need to create electricity we need to manipulate magnetic flux.
If we need to create magnetic flux we need to manipulate electric flux
If we need physical work we need to combine magnetic and electric flux
Alternative current needs to flow back to the source throgh neutral line or return line to be specific.
Direct current always flow both negative and positive in the same time from the source to the load (check Jimboot test with 2 different batteries , even if he deleted my explanation posts prior to his experiment to find out my explanation was valid).

https://chat.openai.com/share/e81e9482-ef6d-4a0a-a03e-857c895bf0ac

If this post is not seen useful/relevant, please delete/move as considered.

[solarlab]

Hi Ufopolitics,

No problem - this kind of "information" hijacking is always welcome and informative!

Thanks for the picture of the Gramme ring armature - quite instructive - noticed the iron wire "core, F"
runs in a loop; with 30 spaced out perpendicular copper windings "B, C, D, etc." around it, all in the same
direction at right angles.

Just a WAG, but it looks like a Transverse Flux arrangement sort-of in reverse (TF is magnetic core with flux
and the copper loop coil placed perpendicular [transverse]).  Interesting! Looks like both the steel core and
the copper windings rotated together, even more interesting!

Probably worth a CAE analysis?  Nice, since we already know the Gramme device worked! But later... 

NOTE: There are probably a thousand ideas and things to try, and I appreciate all that, however the focus
right now for me is very myopic - simply to prove the EE-TFG concept's viability!

So I will recluse and focus only on the EE_TFG at hand until that task is completed - one way or the other...

But please, keep the ideas flowing.

SL

[solarlab]

Hi Classic,

Just a quick F.Y.I. - the video in your #51 post was Flagged by my Nightly Scan. I don't have the time to
follow through and determine what the problem is or attempt fix it. I appears to play OK, however.

You might want to check into that - probably nothing - my scanner "sees a lot of false positives" these days!

SL

[solarlab]

Just a quick "Tip" while we wait. This might be a useful design aid for a variety of projects. 

One Proceedure that may be used to Determine Some Initial Design Objectives

The following proceedure might be one method to use in determining a usable mixture of
design objectives between the pole material, pole windings, current and voltage. This is
static only, however a feel for a starting point may be gained. AEDT Student can be used. 

SL

[ggx9]

Hello SolarLab.
Why are you using two coils on each core rather than one coil with double the turns?

I read through all this thread on your TFM but I must have missed the explanation for this.
Why is there a resistor in series with the coils? How about a low voltage transformer, like 6.3 volts, connected to a variac plugged into the wall with a continuous 60Hz AC supply? This would make it easy to adjust from 0.1 volts AC up to 6.3 volts AC.
Thank you for all your work, much appreciated.

RichardG