Overunity Machines

Very glad to be here.  Thank you very much Ufo for going to the trouble to create this site.  Now that summer yard and garden work is over for this season I am looking forward to having time for more OU research and testing.

Carroll

Thank you for inviting me. Glad to be back with old friends.

V

Good morning to All,

I want to WELCOME all the latest Members!!!

A very special thanks for joining Us on this endeavor to Dog-One, a very well known community researcher and a heck of a Builder!!  

Many thanks (again) to All for being here!!

Best regards

Ufopolitics

Quote from: Ufopolitics on Dec 01, 2023, 09:34 AMA very special thanks for joining Us on this endeavor to Dog-One, a very well known community researcher and a heck of a Builder!!

After the last couple of years, I will be lucky to build my way out of a wet paper bag, but I'm still here and still have the desire.  Hope that counts for something.

Thanks much UFO for standing up this forum and another thank you for the 20 members that didn't leave UFO swinging in the breeze.  Kind of crazy it all starts like this, then decades go by, hundreds of members and thousands of posts; at the end we punch the reset button and try again.  Hopefully this time when people flock to OUM, it's because we got something for certain and anyone that wants to, can do it too.

Quote from: Dog-One on Dec 02, 2023, 10:05 PM

Quote from: Ufopolitics on Dec 01, 2023, 09:34 AMA very special thanks for joining Us on this endeavor to Dog-One, a very well known community researcher and a heck of a Builder!!

After the last couple of years, I will be lucky to build my way out of a wet paper bag, but I'm still here and still have the desire.  Hope that counts for something.

Thanks much UFO for standing up this forum and another thank you for the 20 members that didn't leave UFO swinging in the breeze.  Kind of crazy it all starts like this, then decades go by, hundreds of members and thousands of posts; at the end we punch the reset button and try again.  Hopefully this time when people flock to OUM, it's because we got something for certain and anyone that wants to, can do it too.

Thanks Dog-One,

Quote from: Dog-One on Dec 02, 2023, 10:05 PM...at the end we punch the reset button and try again.  Hopefully this time when people flock to OUM, it's because we got something for certain and anyone that wants to, can do it too.

Do not worry, this time I promise We will not have to punch that "reset button"... ;D
Yes, this time We will have something in REAL OPEN SOURCE, that WILL WORK, and YES, IT IS SO SIMPLE, that anyone with basic skills would be able to replicate it in his work bench...

Unfortunately, I got to discover now (after almost 8 years ago) that Figuera did not showed all, nor "every detail" for a real construction of his device...and only with extreme hard work, investigation, testing all different possibilities...then there is one point when I saw "the missing link"...

Cheers

Ufopolitics

Hello to All,

Ok, many thanks to those Members who wrote to me emails, showing "Who they are?"...or the "Identity Requests" that I asked prior.

Of course, the Members that I already know from previous Forums, and that I already have exchanged posts, info, etc,etc...They DO NOT need to send me any identity proof...I know perfectly well. who they are.

I want to give a SPECIAL THANKS!!, to Member @ronee, thanks for sending me his YouTube channel link, plus another link that proves you were not only following BUT ALSO REPLICATING my previous work, all the way back to "My Asymmetric Electrodynamic Machines" (10-12 years ago) at Energetic Forum!!

PLUS, in your YT Channel, I can clearly see that you are MORE THAN CAPABLE, to replicate this work I am disclosing here, related to Figuera!!


I have created a Specific IDENTIFIED MEMBERS & BUILDERS GROUP, where I added there ALL Members who I know from previous posts, and who also have already sent me his identity and they have already been VERIFIED.

They have ALL PRIVILEGES on this Forum and Topics, including the BUILDER'S CATEGORIES.

I have also named Seven (7) Moderators on that Group, which are Members that I already know from previous Forums PLUS, have exchanged info, related to multiple Posts/Topics, for a long time back...And they have Privileges to set WARNINGS, BAN or DELETE POSTS that are UNWANTED, or not TOPIC RELATED, or simply, Member did not read the WHOLE Topic and made a STUPID REMARK, or simply posts B.S.

I still have NOT OPENED this Forum in My YouTube Channel, where I have more than 7500 Subscribers that have been following me for decades...and, once that I do that, this Forum would be VERY POPULATED with NEW MEMBERS from there...



Regards

Ufopolitics

OK,

So, from NOW ON, you would be able to see ALL Members who are FULLY IDENTIFIED on this Forum, because it will show on each Member's Profile whenever they Post here, they belong to a Special Group named:

Hello,

In case I missed anyone that I previously know, or already has sent his/her info, to REQUEST MEMBERSHIP on this Group.
Or a New Member who wants to REQUEST MEMBERSHIP,  MUST SEND FIRST his INFO through a Private Message here to Ufopolitics.

The way to make the request is:

Go to your Profile drop down window on left upper corner/Go to "My Groups" and Select from available groups the button "REQUEST MEMBERSHIP"

Thanks to all for your help in order to Organize this Forum!!

Ufopolitics

Hello and good morning!

I want to give a SPECIAL WELCOME to Over Unity Machines, to New Member: Solar Lab!
Thanks for joining us on this Endeavor to find the "Holy Grail" of Over unity and Free Energy!

The Category where all this type of Boards are, is already built:

"Moving the Virtual Magnetic Field to Generate Energy"

So, whenever you are ready to share with Us your development about the LinGen, you know you have a Green Light here.


Warm Regards

Ufopolitics

Hello,

Thanks
    I am very glad to become a part of this wonderful community.
    I strongly believe that even the smallest actions can change the world and make it at least a little better place.

It's good to know, my close buddy, that "Dog-One" is also here, as it was through them that I discovered this place.

Regards

Quote from: worldcup on Dec 19, 2023, 01:03 AMHello,

Thanks
    I am very glad to become a part of this wonderful community.
    I strongly believe that even the smallest actions can change the world and make it at least a little better place.

It's good to know, my close buddy, that "Dog-One" is also here, as it was through them that I discovered this place.

Regards

Hello and Welcome Worldcup!!

Thanks for sending me an email with your info...I already added you on the Identified, well Known and Builder's Group.

Regards

Ufopolitics

mikefromspace youtube and rumble here.

I have built a few working zpe devices.  Made an improved version of Stan Deyo's lifter using 74 coil pairs instead of 30, and has an unbeatable geometry. I'm rebuilding a 16v model T generator with zpe function using a 3rd ground, forcing 3 negatives to repel one-another in series loop as a particle accelerator.
Have a few other designs so anyone wishing to try some lemme know, as they are all extremely efficient. You can build a 12ft pyramid of mainly tinfoil with any iron mass buried below it and a few simple parts that'll run your entire house. This one I haven't tried yet but see the promise having worked with zpe for many years.

I am very glad you are coming here, to see, that it is not only about uploading a video and getting thousands of views...and there ends it all...

Here you all, could see our Lab Work, our Future Replications, and all the Specifications to build OU Machines...

And I THANK YOU for ALL your warm, encouraging, contributing and excellent comments, that you have left on my Channel for so many Years!!

Yes!!...we can make it!!

Yes!!...We, a very small group of "Garage Inventors and Builders" that can change our World...

Cheers!!

Ufopolitics

Hello,

I am here to help Ufopolitics control this site...

Must of you never heard of me...but I have been involved on these Fields, probably before some of you were born.

Unfortunately, (for you) I do not have the patience that Ufopolitics have...

I will first issue a Warning, and yes, take it as a Fine Courtesy from my end...then erase and delete any annoying, interrupting, out of context posts

...and if Member come back to repeat it:

I will ban their IP Forever...no matter what name they try using next attempt to register.

Is that simple enough?

Ok, let's do it right, People!!...be courteous, gentle, introduce Yourself FIRST, Who You are?...and use ALL kind of FORUM ETIQUETTE as You can.

Then, avoid for me to take these actions.

Respectfully

Lorenzo et Al

Thank you very much for accepting me in this forum.

My name is Emilio Leal, I know you don't know me but we have all been following the same thing for many years, I saw the old
forum from time to time, there I saw evidence of ufopolitics and also of marathonman and the famous part G.
I am from Valencia, Spain, I have a slight knowledge of Arduino and mosfets which allows me to make some small assemblies.
In Spain we have a WhatsApp group and there some of my friends are Hilario from Hypermotor and Vortios, a friend who
is a very active person trying to replicate Figuera from his prospective with very interesting experiments.

Personally, I am not a great builder, I confess, but I do record videos with my theories and ideas about FIGUERA.
All this is a thing of the past because it seems that UFO has finally revealed the secret.
It seems to be a group of electromagnets activated sequentially, keeping the previous ones activated and in a double direction.
I know it is bold on my part and perhaps this is not the place, but looking at the oscilloscope waveform, it can be seen that when switching the first inductor it generates a lot of output, and the following switching, despite consuming the same amount of each inductor, do not generate as much. exit. I think I know why and how perhaps to achieve that each switching of each inductor after the first, the output as if it were the first. It is not my intention to contribute noise and I will only speak when I have something that I consider can help, you have already achieved the most difficult thing, ufo, really thank you very much for sharing.

In the thread I explained how each inductor could give the maximum.

---

Quote from: emiboom2 on Dec 28, 2023, 02:29 PM
Thank you very much for accepting me in this forum.

My name is Emilio Leal, I know you don't know me but we have all been following the same thing for many years, I saw the old
forum from time to time, there I saw evidence of ufopolitics and also of marathonman and the famous part G.
I am from Valencia, Spain, I have a slight knowledge of Arduino and mosfets which allows me to make some small assemblies.
In Spain we have a WhatsApp group and there some of my friends are Hilario from Hypermotor and Vortios, a friend who
is a very active person trying to replicate Figuera from his prospective with very interesting experiments.

Personally, I am not a great builder, I confess, but I do record videos with my theories and ideas about FIGUERA.
All this is a thing of the past because it seems that UFO has finally revealed the secret.
It seems to be a group of electromagnets activated sequentially, keeping the previous ones activated and in a double direction.
I know it is bold on my part and perhaps this is not the place, but looking at the oscilloscope waveform, it can be seen that when switching the first inductor it generates a lot of output, and the following switching, despite consuming the same amount of each inductor, do not generate as much. exit. I think I know why and how perhaps to achieve that each switching of each inductor after the first, the output as if it were the first. It is not my intention to contribute noise and I will only speak when I have something that I consider can help, you have already achieved the most difficult thing, ufo, really thank you very much for sharing.

In the thread I explained how each inductor could give the maximum.

Hola Emilio, Bienvenido!!

Tuve que arreglar tu texto para poder publicarlo creo que estas copiando y pegando directamente de un formato donde traduces, que es differente y por eso lo pega mal...

Puedes escribir en español directamente en el Topico de Figuera en Español.

Gracias

Ufopolitics

As a new member of the forum I want to introduce myself. I am Gene Bollinger from Van Buren Arkansas USA.  I have been working on the infinite energy machine of Figuera for over 10 years. My commutator is a 32 contact pole made with a 4 inch PVC pipe collar and aluminium contacts held in sequence with brass threaded screws and nuts. I use a double graphite brush contact on each end turning 1800 rpm to get the 60 hz for AC output. I want to thank UFO for setting this forum up and helping me get on. I will post more and fully explain its working on a later post.

Quote from: GreyWolf47 on Dec 28, 2023, 07:59 PMAs a new member of the forum I want to introduce myself. I am Gene Bollinger from Van Buren Arkansas USA.  I have been working on the infinite energy machine of Figuera for over 10 years. My commutator is a 32 contact pole made with a 4 inch PVC pipe collar and aluminium contacts held in sequence with brass threaded screws and nuts. I use a double graphite brush contact on each end turning 1800 rpm to get the 60 hz for AC output. I want to thank UFO for setting this forum up and helping me get on. I will post more and fully explain its working on a later post.

Hello Gene and Welcome here!!

I am very glad to have you here, and you can check out my thread on Figuera revived, as also the Builders Board is waiting for you.
You can open your own Topic there..
Thanks for joining in!

Regards

Ufopolitics

Greetings, my name is Alex.
I live in Australia.
I am a jack of all trades. 
I got sucked into the overunity vortex when a friend told me about overunity documentary she saw in 2017. Not sure which documentary. I became obsessed with theory of gravity powered device then started to read about popular OU myths. I learned some electronics and wasted a lot of time with Bedini Bearden cult. I have made hundreds of experiments but have little to show for it. I have read through thousands of pages of ego wars at all OU platforms. I Never achieved self runner. Had small OU with tesla coils but unreliable tuning and not enough extra energy to loop. I have motivation and some ability to build things but need to spend my precious time more wisely than in past. I wasted a lot of time and good materials on stupid experiments in my ignorance. Best thing to come out of OU community for me was learning to use sea water as fertiliser for agriculture and horticulture, recommended when I was searching for low energy desalination tech.
Most recent OU experiments around parametric converters, parametric excitation with variable inductance. My youtube channel...

https://m.youtube.com/watch?v=wZ_bMs_uVeA

I hope I can help the cause here. I wish everyone here more freedom and more peace. May you all find what you seek!

Hello everyone, thank you very much for accepting me in this forum. I'm from Spain, and I've been looking for a machine that really works for many years. I have had many experiments carried out without success, I think like all of us who are here. After so many years, I have learned that something is always missing. It seems like we already have it, but one small thing is missing, which becomes a big problem. I hope that Clemente Figuera's machine works, it is real OU. Thank you for uploading the last video in Spanish, I don't speak English very well, and the tests you have carried out on this system on YouTube, I don't understand very well, due to the language.  :)

Quote from: Sandy on Dec 29, 2023, 12:48 AMGreetings, my name is Alex.
I live in Australia.
I am a jack of all trades.
I got sucked into the overunity vortex when a friend told me about overunity documentary she saw in 2017. Not sure which documentary. I became obsessed with theory of gravity powered device then started to read about popular OU myths. I learned some electronics and wasted a lot of time with Bedini Bearden cult. I have made hundreds of experiments but have little to show for it. I have read through thousands of pages of ego wars at all OU platforms. I Never achieved self runner. Had small OU with tesla coils but unreliable tuning and not enough extra energy to loop. I have motivation and some ability to build things but need to spend my precious time more wisely than in past. I wasted a lot of time and good materials on stupid experiments in my ignorance. Best thing to come out of OU community for me was learning to use sea water as fertiliser for agriculture and horticulture, recommended when I was searching for low energy desalination tech.
Most recent OU experiments around parametric converters, parametric excitation with variable inductance. My youtube channel...

https://m.youtube.com/watch?v=wZ_bMs_uVeA

I hope I can help the cause here. I wish everyone here more freedom and more peace. May you all find what you seek!

Hello Sandy and Welcome aboard!

Thanks for filling out your Member Profile accordingly.

I also saw your video...nice build, and I am sure you have the capacity/ability to build a Figuera Generator, and even to "upgrade it" later on...

I already included you on the Builders Group and Identified Members here.

Best Regards

Ufopolitics

Quote from: Maxwell on Dec 29, 2023, 04:41 AMHello everyone, thank you very much for accepting me in this forum. I'm from Spain, and I've been looking for a machine that really works for many years. I have had many experiments carried out without success, I think like all of us who are here. After so many years, I have learned that something is always missing. It seems like we already have it, but one small thing is missing, which becomes a big problem. I hope that Clemente Figuera's machine works, it is real OU. Thank you for uploading the last video in Spanish, I don't speak English very well, and the tests you have carried out on this system on YouTube, I don't understand very well, due to the language.  :)

Hola Maxwell,

Es bueno tener aquí a Maxwell en persona!!

A ver, háblanos de las Equaciones Quaternianas que hiciste hace como 200 años atrás?

Y tengo muchas preguntas...


jajajaja...es broma, Bienvenido a este Foro!!

Puedes comentar y preguntar lo que desees en el Tópico en Español:

El Generador Figuera 1908, La Bomba Magnética Lineal del Éter, Revivida (https://overunitymachines.com/index.php/topic,11.0/topicseen.html)

Entiendo que tienes algunas preguntas sobre las Pruebas que hice en video...adelante


Saludos

Ufopolitics

Quote from: emiboom2 on Dec 28, 2023, 02:29 PM
Thank you very much for accepting me in this forum.

My name is Emilio Leal, I know you don't know me but we have all been following the same thing for many years, I saw the old
forum from time to time, there I saw evidence of ufopolitics and also of marathonman and the famous part G.
I am from Valencia, Spain, I have a slight knowledge of Arduino and mosfets which allows me to make some small assemblies.
In Spain we have a WhatsApp group and there some of my friends are Hilario from Hypermotor and Vortios, a friend who
is a very active person trying to replicate Figuera from his prospective with very interesting experiments.

Personally, I am not a great builder, I confess, but I do record videos with my theories and ideas about FIGUERA.
All this is a thing of the past because it seems that UFO has finally revealed the secret.
It seems to be a group of electromagnets activated sequentially, keeping the previous ones activated and in a double direction.
I know it is bold on my part and perhaps this is not the place, but looking at the oscilloscope waveform, it can be seen that when switching the first inductor it generates a lot of output, and the following switching, despite consuming the same amount of each inductor, do not generate as much. exit. I think I know why and how perhaps to achieve that each switching of each inductor after the first, the output as if it were the first. It is not my intention to contribute noise and I will only speak when I have something that I consider can help, you have already achieved the most difficult thing, ufo, really thank you very much for sharing.

In the thread I explained how each inductor could give the maximum.

Hola Emilio Leal!!

Disculpame que no te había reconocido, quizás por fijarme solamente en tu nombre de miembro...

Eres muy bienvenido acá!!, y sé que nos puedes dar consejos muy útiles!!

Por favor, quiero que te sientas cómodo en este sitio!

Puedes comentar directamente en Español si deseas, o te sientes mejor expresándote de esta forma.

Te incluyo en el Grupo de Miembros reconocidos para que tengas acceso a los Topicos de Construcción

Y si necesitas algo, déjame saber en mensaje privado.
También he creado un Tópico sólo en Español en este enlace: El Generador Figuera 1908, La Bomba Magnética Lineal del Éter, Revivida (https://overunitymachines.com/index.php/topic,11.0/topicseen.html)
Puedes escribir allí, o si deseas puedes abrir tu propio Tópico debajo de Figuera...o en cualquier parte que desees.

Un Saludo cordial

Ufopolitics

UFO, I have a very good friend of mine from Texas that is an active builder that I would like to recommend for the builder site. He is presently working to duplicate the LIBERTY ENGINE#3 and I have been helping him with advice and understanding in ways to test the build. How do I introduce him to this group? Thanks Gene

Quote from: GreyWolf47 on Dec 30, 2023, 07:45 AMUFO, I have a very good friend of mine from Texas that is an active builder that I would like to recommend for the builder site. He is presently working to duplicate the LIBERTY ENGINE#3 and I have been helping him with advice and understanding in ways to test the build. How do I introduce him to this group? Thanks Gene

Hello Gene,

Check your inbox here...top, left, small box, looks like a tray...between your avatar and bell of notifications..go to inbox.

Cheers

Ufopolitics

Hello to All,


The "Bionic Farmer" from the Down and Under Land...Australia, and a HECK of a Builder!!

We have been working on Figuera back to 7-8 years ago...together with Marathonman...

And I am very glad to see you here!!

Warm Regards

Ufopolitics

Quote from: Ufopolitics on Dec 30, 2023, 04:16 PMHello to All,

I want to give A VERY BIG WELCOME to an old good friend of mine...

Mr. Cornboy

The "Bionic Farmer" from the Down and Under Land...Australia, and a HECK of a Builder!!

We have been working on Figuera back to 7-8 years ago...together with Marathonman...

And I am very glad to see you here!!

Warm Regards

Ufopolitics

Thanks for the warm welcome UFO, i will get started once i study exactly what your build requires, as you know old friend, i mainly am good with the mechanical side, and need help with electrical and magnetic understanding.

 Hope i can do it justice.

 Warm Regards  Cornboy.  :)   

Quote from: Cornboy on Jan 01, 2024, 05:29 AMThanks for the warm welcome UFO, i will get started once i study exactly what your build requires, as you know old friend, i mainly am good with the mechanical side, and need help with electrical and magnetic understanding.

 Hope i can do it justice.

 Warm Regards  Cornboy.  :) 

Hello Cornboy,

The basic knowledge required here is about good and steady winding, balanced coils, same spec's basically on sequential exciters...plus the commutator rotary switch that you have many different styles... ;D

We are not on the Electronic Controllers stage yet...and I believe that was already designed about seven years ago...and Marathonman already had a board to mount all components...

First I want to make all tests with commutator switching.

Regards

Ufopolitics

It is good to have you here!!

Regards old friend!!

Ufopolitics

 Yep UFO, i agree with the mechanical switching, after all, that's what was used in 1908 hey..

 Best regards  Cornboy.     :)

Hey UFO:
    Glad to be onboard. Good to see this will be a tight ship aimed at the growth perspective and not a lot of hash. 
thay

cleaned
               

Hi ALL,

I am happy to be here. I tried to replicate a lot of devices: hho, high voltage, generators etc.

I see we have here a good replica and approach, hope to be able to replicate with your help.

Thanks.

Vitalie

Hi,

just forgot to ask, is there a getting started guide for replication?

Where do I start after watching the main video, from what I understand the hardest part is building the commutator.

Please advice.

thanks.

Vitalie

Quote from: bugaian on Jan 06, 2024, 03:17 PMHi,

just forgot to ask, is there a getting started guide for replication?

Where do I start after watching the main video, from what I understand the hardest part is building the commutator.

Please advice.

thanks.

Vitalie

Hello and welcome Bugaian,

We still do not have exactly a "Replicating Guide", I have been showing quite a few videos on how to start project...

YouTube Playlist: My Method to Build the Figuera Generator (https://www.youtube.com/playlist?list=PLDK7GC_dPVjjJI58FdCSi-sQRtkSvQE-n)

As I also recommend to start by reading the Topic:  FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED (overunitymachines.com) (https://overunitymachines.com/index.php/topic,5.0.html)


Cheers


Ufopolitics

Hello,

I want to WELCOME New Member lota, excellent Builder from OU!!

@lota, I already included you on the Builder's Group, thanks for joining Us!

Regards

Ufopolitics

Hello
thanks for the inclusion.
Why can't I include a post here? 
https://overunitymachines.com/index.php/topic,14.msg178.html#msg178
Greeting
Lota

Quote from: lota on Jan 10, 2024, 02:39 AMHello
thanks for the inclusion.
Why can't I include a post here? 
https://overunitymachines.com/index.php/topic,14.msg178.html#msg178
Greeting
Lota

Hello Lota,

Go to: USER ACTIONS (right top or bottom) select: REPLY on pop window.

Or use: QUICK REPLY

However, on Quick Replay you do not have a full editor.

After you post you can always select: MODIFY to fix or add your  post.

Regards

Ufopolitics

Hello to All,

Whenever you have an issue related to website problems, like not being able to post on a Topic or not able to open New Topic...or something else.

Please Report it to Moderator Staffusing the NOTIFY button

If you are not set as an Identified Member, or Builder, your New Topics or Posts needs to get approval for publishing.

So, write them, and if they get approved you will see it as soon as it gets approved.

Thanks

Ufopolitics

Hello and thank you very much for accepting me on this forum.
I'm from Romania. I have build in the past Bedini chargers and Bob Beck Blood Electrifier.
I hope I will be able to build the Clemene Figuera generator soon.

I am new here but i think this may be the biggest thing to happen in our time this century. I am still working on replicating the first method. Hopefully i can manage to put it together but i am very grateful to Ufopolitics for his diligence and hard word. Keep up the good work we are eternally indebted to you

Quote from: themarv on Jan 26, 2024, 05:05 PMI am new here but i think this may be the biggest thing to happen in our time this century. I am still working on replicating the first method. Hopefully i can manage to put it together but i am very grateful to Ufopolitics for his diligence and hard word. Keep up the good work we are eternally indebted to you

Thank You!!

And You are very welcome @themarv to Overunity Machines!!

You know, I love people like you...humble.

You did not write here that you are building my method#1...that you have knowledge about CAD and have some shop tools...You have not even requested to join our Builder's Group...

And if you did not post here, I would have not seen your profile notes...

Ok, so, now you are on the Builder's Group, and you will have full access to our builder's topics.

It is nice to see that you live in Zimbabwe, Africa...and you may need this machine built more than ANYONE here!!

God bless you!!

Ufopolitics

I am happy to be here, the site seems very dynamic and I hope to be able to make my small contribution to what we are all here for and to have fruitful exchanges.
Thanks for trusting me.
Jagau

Hello to All,


Dr, Wlazlak is the Inventor of the EttCM Energy Technology.

That he started developing many years ago.

Thanks for joining Overunity Machines!!

I have created a specific Board : Energy to Torque Conversion Machines (overunitymachines.com) (https://overunitymachines.com/index.php/board,15.0.html) 

Where He already started his first Topic:  Using 2 forces of energy for one Output Device (overunitymachines.com) (https://overunitymachines.com/index.php/topic,59.0.html)

Warm Regards Dr.

Ufopolitics

Hi everyone and Ufopolitics
 I'm very happy to join this community, it's a real ray of light.
A warm hug from Italy to all of you and thanks for the noble passion you share. 

Quote from: Gino on May 13, 2024, 04:15 PMHi everyone and Ufopolitics
 I'm very happy to join this community, it's a real ray of light.
A warm hug from Italy to all of you and thanks for the noble passion you share.

Ciao Gino, 

Welcome to Overunity Machines!!

I got you on the Builders Group.

I know you have been around for a long time friend!!

Regards

Ufopolitics

UFOPolitics,

I don't seem to be able to find how to delete my own posts on the SL's Transverse Flux thread so if you would please, delete my recent posts and please remove my membership here at this forum.

Many thanks!
Regards,
Pm

Quote from: partzman on May 17, 2024, 03:15 PMUFOPolitics,

I don't seem to be able to find how to delete my own posts on the SL's Transverse Flux thread so if you would please, delete my recent posts and please remove my membership here at this forum.

Many thanks!
Regards,
Pm

Hello Partzman,

Please, read my response(s) on that Topic... EEG_EM_New_Technique_TRANSVERSE_FLUX (TF) (Provisional Patent Applied for) - Page 22 (overunitymachines.com) (https://overunitymachines.com/index.php/topic,16.msg1423.html#msg1423)

Regards

Ufopolitics

UFOPolitics,

Yes, I have seen both yours and others responses there.  Many thanks!

Regards,
Pm

Hi All, I'd like to introduce myself and the project I am working on. I used to be a member on overunity.com many years ago (I'm still a member but have been inactive for a number of years and now, sadly, that forum is archived.) My interests on overunity were particularly magnetic machines and gravity/buoyancy machines.

In March this year I was watching Robert Murray-Smith's The Secret of Magnetic Motors video on his YouTube channel, about Wesley Gary's magnetic motor, and that resparked my interest in free energy research and, indeed, inspired me to develop a new idea for a PMM.

I have written up the project on my website (https://tomboy-pink.co.uk/SFT/) but, as a brief introduction, the idea is this: When magnets have opposite poles facing they attract; when they have like poles facing they repel. If, while they are repelling, you insert a sheet of steel between the poles, both magnets will be attracted to the sheet. What you have done by inserting the sheet of metal is to switch the flux so that the magnets switch from repulsion to attraction. As I say, there is a deeper discussion of the principle on the site.

I have developed a prototype device using this principle - in fact I am now on version 5 of the design, having already built a prototype (the Mk4) and completed a redesign (Mk5) that is ready to print. I'm waiting for a response from my local FabLab as to when I can go in to print the new prototype. I have also spotted a very reasonably priced and capable 3D printer (Creality Ender-3 V2 KE) and am hoping to find a sponsor locally who could set me up with one.

The designs for these prototypes are available open source from my GitHub repo, which is linked from the above web page. I'll add an image of the current prototype to this post and, if there is interest, I'll begin a thread to discuss the device.

Nice to find another community of like minds,

Regards,
Prajna

(https://tomboy-pink.co.uk/SFT/media/banner.png)

Hello Prajna and Welcome to OUM!!

I already add you up as an Identified Builder Group Member.

Interesting project!!

Good luck!

Regards

Ufopolitics

Quote from: Ufopolitics on Jun 17, 2024, 12:06 PMHello Prajna and Welcome to OUM!!

I already add you up as an Identified Builder Group Member.

Interesting project!!

Good luck!

Regards

Ufopolitics

Thank you. I will head off and start a thread for the discussion

Ah, I don't see how to start a new topic in the Magnetic Motors section (where I think the discussion belongs). Maybe the button is hiding or maybe I don't have permission to do more than reply to posts. @Ufopolitics, can you help? Thanks.

Quote from: Prajna on Jun 17, 2024, 12:48 PMAh, I don't see how to start a new topic in the Magnetic Motors section (where I think the discussion belongs). Maybe the button is hiding or maybe I don't have permission to do more than reply to posts. @Ufopolitics, can you help? Thanks.

Hello Prajna,

Yes, you do have permission to open a New Topic.
The "Permanent Magnet Machines" is a Category, not a Board, and you only can open New Topics once you select a Board under a Category.

Since we do not have a board for your type of PMM Method , I created one for you, where you can open a new topic:

Switched Flux Transmission (STF) (overunitymachines.com) (https://overunitymachines.com/index.php/board,21.0.html)

If you have any more issues let me know.

Enjoy


Ufopolitics

That's great. Thanks for the explanation and for setting it up. I'll get to that tomorrow from my laptop.

thank you for creating this amazing forum! i hope to learn and share with everyone, so we can all create a better future!

Quote from: ProfessorBean on Jun 26, 2024, 01:42 PMthank you for creating this amazing forum! i hope to learn and share with everyone, so we can all create a better future!

Welcome Professor Bean!!

After I have seen what you can put together, on the Topic you just opened:

Combining devices into a usable system for overunity (overunitymachines.com) (https://overunitymachines.com/index.php/topic,72.0/topicseen.html)

I have added you to our Builder's Group, so you could upload and do all your disclosure without any approval required from Admin.

Impressive build!!

Btw, I took the liberty of embedding your two videos linked on your post for easier access.

Again, you are very welcome to our small community of researchers and builders!!

Regards

Ufopolitics

1-"I want to buy your Project"

2- "I want to speak/talk/communicate with you"

Meaning with me, Ufopolitics, or any other Administrator or anyone else having any Administrative Staff Position on this Website!!

FURTHER ON, I WILL BE BANNING ALL THOSE IP'S...SO YOU WILL GET AN IMMEDIATE REJECTION AT THE TIME TO ATTEMPT TO REGISTER AGAIN!!


Ufopolitics

NOW, DUE TO AN INCREASING ATTACK FROM BOTS AND SPAM TO TRY TO REGISTER ON THIS FORUM.


If a REAL person wants to register, please write your DETAILED INFO-DATA about yourself, AS WHY do you want to be on this Forum (Reason to join)

Must include your Location (verified by your IP and your email)

Plus, the Nick Name you want to have on Forum.

And send it to: overunitymachines@gmail.com

I just do NOT have the time to keep rejecting, EVERYDAY, all these continuous attempts from bots and spam to register. Even though I have added the Captcha codes and other questions, they seem with the help from AI, now they can "bypass" all those.

Respectfully

Ufopolitics

Hello Everyone!
My name is Leonard. Over the past 25 years, I have been building all kinds of devices without being successful, you can can say that I am an expert in dealing with disappointments ;D It was sometimes hydrogen, gravity, magnetic devices or electronics. Every time I am attracted by these "free energy" techniques. In this year 2025 I am back into the magnet motors. The Luling motor was the biggest incentive to try something again. I am a 3D printing specialist and use CAD software reasonably well. I can make what I want. I hope to be able to make an important contribution to this forum and together with you ensure that we as an open-source community step forward and make a difference, the world is crying out for it.
The Luling motor is hard to make with 3D printing, you really need craftmanship and metal components. I will be back with a posting when I have something that works. I don't think it's useful to show a work in progress that is doomed to failure, let's spend our time on the development. 
Kind regards,
Leonard

WELCOME LEONARD! There are many of us who have found MANY ways to build overunity devices that DON'T turn out as well as we hoped. That doesn't mean we quit trying, it just means success has been delayed!  I am in process of completing a build of Figuera's infinite energy machine based on a moving flux field with no mechanical movement of parts. Again welcome to the group. GreyWolf47