Overunity Machines

This is the most easier electric generator that anyone can ever build with very basic tools and limited or almost no knowledge about electricity.

Those with advanced knowledge and high skills may build tremendous powerful generators in pretty small size that can power whatever they want as long as they follow the same principle of work for this contraption. And all is safe with no harm to themselves or nature.

In order to understand how and why it works one may want to know what series resistance is and what parallel resistance is, also understand that connecting a series to parallel create a gradient with potential difference which can not be exploited on its own but introducing an inertial force is necessary as a second gradient to be exploited by the same setup.

Also, there is a need to understand what a magnet is what the fundamental difference between electromagnet and permanent magnet is ... which natural lead to understanding of magnetism phenomena. Also, it will become obvious the aether (or however you want to call it) plays an essential role when we tap into very essence of energy.

I just created a discussion with chatgpt that supposedly will save some time with detailed explanations if anyone want to follow:

https://chat.openai.com/share/4e02ec85-1e33-4cdf-bac4-a7c1577ac31b

Note that i was trying to avoid reaching certain boundaries were chatgpt or any "intelligent assistant" will mess up or simply deny assistance as it happens a lot to me.

I have updated with replacing additional coil for start with a permanent magnet
https://chat.openai.com/share/fe60348a-6e59-44dc-8252-a0ec5dd4b84f

Hello Classic,

Thanks for opening this Topic!

Yes, Cook's Patent is so simple...it contains the BASIC simplicity of Magnetic Fields ability to generate energy infinitely...

Here I uploaded all images plus text on his Patent:


Regards

Ufopolitics

If we read the patent description we may observe how Daniel Cook have created a modulation of magnetic flux using resistance gradient and inductance at resonance allowed by multiple iron strands as a core. And that is soft iron core which can be easy obtained by using pure iron wire with adequate heat treatment (i know it is similar with steel). Difference between carbon steel and annealed iron consist in their ability to respond to specific resonance and dampening effect.

There is an updated link with more about resonance and comparison between iron core and air core systems https://chat.openai.com/share/5bc8c1ff-fca5-408b-bf2a-aabf6cbae4ed

We can observe, that in air core systems we need a higher voltage for input (Don Smith type variant 1 with coils) and higher frequency can be used.

Also, main challenges in order to make the system work and where to pay attention minimising as much as possible any other factor with simple solutions, in what I believe can show some positive results observing from other description on few forums attempted replications where some things not been looked at in my opinion, and especially on iron core construction and dimensions.

Also note the starting input of the system, especially if the whole system is not made self resonant, will result in failing to work as per patent description.

If the system is not self resonant as a whole, a driven frequency signal must be supplied all time and we will have eventually a very efficient transformer.

Also, i forgot to mention another important point: if wires length will be multiple of 1/2 wave length of the iron core natural frequency multiple harmonic resonance will occur, which in turn will amplify the output of secondaries.
Also, as many of you know, the longer is solenoid the smaller diameter of former to keep sufficient inductance necessary for action. Capacitance is related to frequency and therefore must be included in calculus.

This is quite interesting conversation: https://www.reddit.com/r/NikolaTesla/comments/177u50r/daniel_mcfarland_cook_induction_coil_1871/?rdt=55554

Quote from: Classic on Feb 21, 2024, 06:22 AMThis is the most easier electric generator that anyone can ever build with very basic tools and limited or almost no knowledge about electricity.

Those with advanced knowledge and high skills may build tremendous powerful generators in pretty small size that can power whatever they want as long as they follow the same principle of work for this contraption. And all is safe with no harm to themselves or nature.

Hello Classic,

As you have described above, on your first post, being so simple, that anyone with only very basic tools and limited or no knowledge about electricity can build it...may I ask you:

Have you build one?...that you can show us all, its advantages, performance and results?

Any videos about it?...photos?

Thanks

Ufopolitics

No, i did not build it ... requires large amount of wires and they are not cheap at all on top of being much to heavy for what I need.

 If can figure out how it can be reduced in size i will.

Quote from: Classic on Feb 22, 2024, 02:26 PMNo, i did not build it ... requires large amount of wires and they are not cheap at all on top of being much to heavy for what I need.

 If can figure out how it can be reduced in size i will.

Classic,

You "walk in" into a Builder's Website...and I have no idea, if you have seen the Builds going on around here (because YOU have the access)...but, still, in a week you have open Three(3) Topics, which is great, IF at least on just ONE, you show to all of us about your skills, your expertise, what you have done...that should go beyond just writing and writing here, about things that must of us already know, but enhanced.

I know about Cook's Coils for a long time...as many here also know...

Point is, that when you open a Cook's Topic here, is to show that YOU have build it, and that it works or it don't...then share your spec's, and many here could help you where you may be wrong...

Either that above, or at least, show of anyone that has built it, and what has happened?...show his/her videos, show images, relate the builder's linked website...or channel on YT....etc,etc.

What I mean is, that this is a Website about FACTS, about BUILDS...either successful or not...

This is NOT a "History Channel" about Over Unity "POSSIBLE MACHINES", Ancient History "Artifacts"...from our past or our future, just like a "Magazine" type report is...

[color=var(--input-txt-color)]You started this Topic, writing "that anyone could build it", "not much required" "no experience needed"...except you?...the Topic creator, on a Builder's Website?[/color]

Come on man!!

Again, anyone here can go to Chat GPT, and start a conversation related to WHATEVER they feel to...and then post it here...no big deal at all..

EXCEPT THAT, AI Bot reveals something EXPECTACULAR, that we must know, the Worlds should know...it has not happened.

WE HERE, RELY ON FACTS, ON BUILDS, ON REAL MACHINES DEMONSTRATION'S!!

Yes, absolutely you can reduce that Patent to -at least- a 50% and still be able to see something...But you do not know that??

Please DO NOT OPEN A SINGLE, NEW TOPIC, ON WHOLE FORUM!!

And I want to see some BUILDING FACT RESULTS, on the other THREE TOPICS you have opened.


Ufopolitics