The TORSION FIELD & EFFECTS

[Ufopolitics]

@citfta

Is ok Citfta, I believe it is a Translation Problem.

Member is from Russia, and he is new, I just approved him a day ago.

So, let's leave his comment.

Actually, I have to do some cleaning on this Topic...

Thanks much for your prompt response.

Regards

Ufopolitics

[Alikberov]

@ Alikberov,

I have read your post a couple of times and looked at your emulation of something.  You don't show the ciruit you claimed to have developed.  You admit you don't really know what it is looking at.  And your emulation has no explanation about what it is showing.  In other words your entire post adds nothing to this discussion.  I will leave your post here for Ufo to review and later if you haven't explained anything in a meaningful way I will remove your post for being offtopic.

Respectfully
Carroll

Ufo, please delete his post if you agree with my assessment.  Or I can do it later if you agree.

Thank You!

Well, my circuit diagram is very old and presented as ASCII-graphics. It may be to difficult to read this draft. I attached this now.

In this circuit I just used two key IC - 74S169 and 7495.
First - is bidirectional counter, strobed by first frequency source.
Second - just register for indication, strobed by second frequency source.

But later I developed this circuit and extended with many other IC for making mini raster 5x7 on the LED, as You can see.

Logic of device is very simple.
Bidirectional counter is very fast strobed for toggle the direction.
Register - just latched the current count at this moments.

All other IC - just for support the raster 5x7 on the LED matrix.

As You can understand, that circuit is useless.
But this worked! This haved "extra sensoric" after long time of fine tuning the two generators.
Really, this device showed stable "picture" in the long time after. But sometime something was have influence and "picture" showed this.

Later I find Time Shift Detector and just forget my-self circuit.

Few years I coded different algorithms for experience internal "sensoric" of my PC.
That program - is "modern" version of research in that period (2004-2005).
Program have lots thousands of assembly instructions, but sources - is lost.

Like the electrical circuit, that program is finding "harmony" of PC TCXO (red, green and blue "rays") too. And after calculation by few rules is showing this as direction of "white ray".
But under emulation we have too "ideal conditions", when moving of "rays" - strongly mathematical.

In present days is too difficult to find good vintage notebook for running this program.
But, may be, anyone have.

Thank You!

[Alikberov]

Well, sorry.
If needed...

This is remake of that circuit as sample draft.

Respect!

[Ufopolitics]

Hello to ALL,

No matter about my personal situation, I could not hold on to post about this new development, that I have started a while back...just a "while" back.
So, I will start from the First and Simplest part...

A SIMPLE COIL

We all know that by simply winding a single thread of wire (meaning, not a bifilar, or else) ...just a single wire...wound around a circular cylinder (just to pick a simple geometry)

And that "cylinder" could be made of a solid steel, or a hollow plastic piece, like a spool.

Well, the point is that no matter if it is an air or solid or laminated, steel core...whenever we add a DC Current (+/-) to the terminals of the ending wires, it automatically, generates a Magnetic Field...right?

(THE SINGULARITY) So, we also know all the studies behind this "phenomena"...like where is the Electric and the Magnetic Fields on that single wire...like in a 90 degrees alignment.

So, up to the above paragraphs, I have described the way a "typical coil" is made (very briefly)...and it generates a Magnetic Field...

This Generated Magnetic Field produces a North and a South Pole, and if we trace a line between both magnetic poles Center, we get an Axis.

And so, this Pole Magnetic Axis is 'exactly' Perpendicular to our winding's 'loops' plane...As well as 'Parallel' to the whole coil cylindrical shape, Axis.

Hope you are all following me up to here...so far.... because it will get a bit more complicated from here on.

A MAGNETIC FIELD GENERATING ANOTHER "FIELD"...

Ok, so here I will have to cite our first simple coil structure...based on a single wire...

But now, we will make that 'single wire conductor' as a very long and thin coil, as it was our 'single wire' conductor, except that now we will add a small steel wire as a center core.
Then we wind our coil around that center wire core...then we make a whole spool of that special type of 'coil-cored-wire'...

Let's stop here and make some simple test:

Let's extend all that coiled wire with a centered steel core wire, in a straight line...we add DC Power on both ends, and we also get a Magnetic Field...except it is a very long field, all across the conductor length.

Yes, it is a very long and fine steel core coil...and it will render a very long Magnetic Field.

If we all understood up to here...then the rest is a piece of cake...

Now comes the exciting part...

Let's get that spool of our 'coil wire' and wind it around another cylindrical shape, of course, wider and bigger coil.

Once we finish winding it, we will still have two end terminals...one on the start, another one on the end.

So, 'Geometrically' we have wrapped a very Long Magnetic Field (coil-cored-wire) around a Geometrical Cylinder Shape form...

Then add power to it...DC Power, and if you have followed me related to reading/imaging the Magnetic Fields from all my prior videos...like ferrocell, magnetic viewing film, CRT Monitor read, etc.

Then image what type of field you have created there...

NOTE: Please first try Testing on an air core, before moving to a steel core!!

Related to Resistance, Voltage and Amperage, it comes out from the same method I have explained before when building the Figuera Machine.

Meaning, it is basically Ohms Law calculations, to build first your 'coil-wire' with a steel wire core.

You do not need HV, to make this...you could use 12V and lower amps and that will give you the required wire gauge to build your coil-wire.

As you do not need too many turns on the final cylinder geometry...

Sorry this time I am not putting my colorful diagrams and graphics...since I do not have the time to do so right at this moment, due to the very long hours it takes to make my type of images.

Hope you all understand it.

Regards to All

Ufopolitics

Please, remember to keep helping me on my personal-economic situation, and I want to thank to all those that have Donated already!!!

But I need more help!!

Thanks to ALL of you for your great help!!

[Ufopolitics]

Hello All,

Now, you could make your own search, whether with plain Google or AI...related to my above Disclosure.

A "Spring-Coil Type Magnetic Field"?

Do 'they' make a 'Spring Shape Permanent Magnet'?...like I have described above?

You will NOT get any actual results, related to what I have disclosed above.

We are using a "wound" Magnetic Field Coil-Cored-Wire to Generate another Field...

We are "bending" and winding a Magnetic Field around a circular geometry...to generate 'another field'...

Is it a 'Gravity Field'?...or is it another type of Magnetic Field which envelops different properties than what we know so far?

This is a very simple experiment...as I said before, it could be done with low voltages and amperages...but you will still get very 'similar' results.

As this disclosed above, was the BASIC Geometry shape...but it will give you the 'results' that could be measured and tested.

QUESTIONS:

Does this new wound type of coil, gives you a 'North' and a 'South" readings?

What do you observe on the simple and cheap Magnetic Viewing Film?

Getting a Compass near both Coil ends (Poles)...how the needle behaves?

Does it 'attract' or 'repel' other Magnetic Fields that get close to its ends (Poles)?

Does this Assembled Coil, lose weight when set on a weight scale while powered up?

Only testing yourselves will give you an answer to all those questions above and more...

Ufopolitics