FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[kampen]

Reply to message # 664

Hello Ufopolitics, my friend,

Thank you very much for taking the time to go through the video again so carefully and especially frame-by-frame. 
That level of attention really helps move this forward in a meaningful way.

And no worries at all about the earlier interpretation what matters is exactly what you've done now: re-evaluate, refine, and correct. 
That is how this kind of system gets properly understood.
 
About your updated observation (7 bulbs ON)
Yes your new observation is correct.

What you are seeing is:
a 7-coil continuous conduction window, with the 8th coil being exchanged at the edges
So during transition:

• 7 bulbs remain continuously ON (center of the chain)
• 1 bulb is leaving
• 1 bulb is entering
• and the exchange happens at the boundary

That is exactly why:
the center does not blink.
And as you pointed out that is already a very strong result.
It confirms that:

• the current path is never fully broken
• the system maintains continuity
• and the "field window" is effectively traveling

 
About your conclusion
I agree with your updated assessment:
The system is already very close — and what remains is fine tuning.

Your two points are exactly the right ones:
1. Tighten the transition timing
Yes — the leaving and entering bulbs need to be brought closer together in time.
Right now:

• there is still a small underlap at the edge
• which is why we briefly see 7 instead of a fully balanced 8-equivalent transition

So the next step is:
reduce that gap and increase overlap slightly
Not a big change just a small timing shift.
 
2. Extend dwell at Groups 1 and 8
Also correct.
The end groups:

• do not repeat like the middle groups
• sit at the boundaries
• and therefore need a bit more time compensation.

So adding a slight dwell extension at Group 1 and Group 8 is exactly the right adjustment.
 
One small refinement to your interpretation
I would only add one nuance not a disagreement, just a clarification:
Even though we see 7 bulbs ON, the real goal is not strictly "8 bulbs always ON," but rather:
maintain a continuous and stable excitation envelope
In practice:

• a clean 7→overlap→7 transition with good timing can already behave very well
• the important thing is that the handoff is smooth and continuous.

So your focus on tightening the transition is exactly the right next move.
 
About your comment on the architecture
Thank you, I appreciate your words.
What you're seeing is really the result of the selector topology, which keeps:

• a continuous path through the center
• and only shifts the edges

And yes this is where SSD has a real advantage over mechanical commutation.
 
Final alignment
So I would summarize where we are now:

• ✔ Continuous conduction path confirmed
• ✔ 7-coil stable window verified
• ✔ Transition gap is small, not structural
• ✔ Only minor timing adjustment needed
• ✔ Endpoint dwell compensation needed

Exactly as you said:
It is not a redesign it is fine tuning.
 
Personal note
Thank you as well for your kind words regarding my colleague that means a lot. 
We are all hoping for a good outcome, and your support is appreciated
.
Excellent work on your side as well your updated analysis is much closer to what the system is actually doing.

We are getting very close now.

Regards, Alex