FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[Ufopolitics]

Hello All,

Ok, so here is a better laid out diagram about the previous post:

Basically the Groups connections lines are defined as Negative black on left and Positive red on right side.

Now, making a detailed sequence description from Groups Transitioning and the Single Coils involved, starting from Group #1 to Group #8 (Left to Right movement):

1- Start sequencing by Group 1 (ON), comprehending Single Series Connected Coils 1, 2, 3, 4, 5, 6, 7, 8, powering terminals -1 & +1, where Single Series Connected Coils 9 to 15 are OFF.
2- Transition to power Group 2 (ON), comprehending Single Series Connected Coils  2, 3, 4, 5, 6, 7, 8, 9 powering terminals -2 & +2, where Single Series Connected Coils 1 plus 10 to 15 are OFF.
3- Transition to power Group 3 (ON), comprehending Single Series Connected Coils  3, 4, 5, 6, 7, 8, 9, 10 powering terminals -3 & +3, where Single Series Connected Coils 1, 2 plus 11 to 15 are OFF.
4- Transition to power Group 4 (ON), comprehending Single Series Connected Coils  4, 5, 6, 7, 8, 9, 10, 11 powering terminals -4 & +4, where Single Series Connected Coils 1, 2, 3 plus 12 to 15 are OFF.
5- Transition to power Group 5 (ON), comprehending Single Series Connected Coils 5, 6, 7, 8, 9, 10, 11, 12 powering terminals -5 & +5, where Single Series Connected Coils 1, 2, 3, 4 plus 13 to 15 are OFF.
6- Transition to power Group 6 (ON), comprehending Single Series Connected Coils 6, 7, 8, 9, 10, 11, 12, 13 powering terminals -6 & +6, where Single Series Connected Coils 1, 2, 3, 4, 5 plus 14, 15 are OFF.
7- Transition to power Group 7 (ON), comprehending Single Series Connected Coils 7, 8, 9, 10, 11, 12, 13, 14 powering terminals -7 & +7, where Single Series Connected Coils 1, 2, 3, 4, 5, 6 plus 15 are OFF.
8- Transition to power Group 8 (ON), comprehending Single Series Connected Coils 8, 9, 10, 11, 12, 13, 14, 15 powering terminals -8 & +8, where Single Series Connected Coils 1, 2, 3, 4, 5, 6, 7 are OFF.

Up to here we have completed the Left to Right Sequencing of transitioning Groups from G1 to G8, resulting on the Displacement of Magnetic Field as well, or a Half Cycle.

Picture yourself that when a Group is ON, it is carrying the Full Magnetic Field within.

Now the Reverse Sequencing, or movement from Right to Left of Groups transitions:

1- Transition to power Group 8 (ON), comprehending Single Series Connected Coils 8, 9, 10, 11, 12, 13, 14, 15 powering terminals -8 & +8, where Single Series Connected Coils 1, 2, 3, 4, 5, 6, 7 are OFF.
2- Transition to power Group 7 (ON), comprehending Single Series Connected Coils 7, 8, 9, 10, 11, 12, 13, 14 powering terminals -7 & +7, where Single Series Connected Coils 1, 2, 3, 4, 5, 6 plus 15 are OFF.
3- Transition to power Group 6 (ON), comprehending Single Series Connected Coils 6, 7, 8, 9, 10, 11, 12, 13 powering terminals -6 & +6, where Single Series Connected Coils 1, 2, 3, 4, 5 plus 14, 15 are OFF.
4- Transition to power Group 5 (ON), comprehending Single Series Connected Coils 5, 6, 7, 8, 9, 10, 11, 12 powering terminals -5 & +5, where Single Series Connected Coils 1, 2, 3, 4 plus 13 to 15 are OFF.
5- Transition to power Group 4 (ON), comprehending Single Series Connected Coils  4, 5, 6, 7, 8, 9, 10, 11 powering terminals -4 & +4, where Single Series Connected Coils 1, 2, 3 plus 12 to 15 are OFF.
6- Transition to power Group 3 (ON), comprehending Single Series Connected Coils  3, 4, 5, 6, 7, 8, 9, 10 powering terminals -3 & +3, where Single Series Connected Coils 1, 2 plus 11 to 15 are OFF.
7- Transition to power Group 2 (ON), comprehending Single Series Connected Coils  2, 3, 4, 5, 6, 7, 8, 9 powering terminals -2 & +2, where Single Series Connected Coils 1 plus 10 to 15 are OFF.
8- Transition to power Group 1 (ON), comprehending Single Series Connected Coils 1, 2, 3, 4, 5, 6, 7, 8, powering terminals -1 & +1, where Single Series Connected Coils 9 to 15 are OFF.

Up to here we have completed a FULL CYCLE of the Field Displacement once returned to the start origin (Group 1)
Now, this does NOT have to follow a start of generator from 'exactly' G1, as it could start wherever the brushes stopped on the Commutating Distributor terminal, so, it could be in the middle, at the end of half cycle or anywhere else, and as the operational speed reaches the RPM's it will compensate the Cycles development.
Other words, the "magnet" (Magnetic Field) could be stopping on the middle of the Linear Track, and as soon as that group is ON it will start displacement according to where it stop and the direction of movement of the brushes will continue the cycles.
Please note that I highlighted Single Coil # 8, to realize that it is always ON during ALL Sequences.

Regards

Ufopolitics

[Ufopolitics]

Hello All,

As a continuation from previoius posts, I am showing here the way each Group is wired to each Negative & Positive Commutator assemblies.

So here is the FULL SEQUENTIAL EXCITEMENT SYSTEM AND ITS CONNECTIONS, EXCEPT THE INPUT DC POWER SUPPLY CIRCUITS to each Negative & Positive Brushes through TWO CONTINUOUS SLIP RINGS PLUS ITS RESPECTIVE BRUSHES.

Also please note that I named 'SHAFT 1' for BOTH Commutators Assemblies, meaning BOTH Commutators as its respective Brushes are mounted on the SAME SHAFT, SAME ROTATION DIRECTION.

This Dual (Bipolar) Rotary Commutating System of 32 Elements-Contacts each is capable of:

1- Complete a Two Full Cycles in just One Revolution.
2- Which means that it would require only a Max of 1800 RPM's to Generate the 60 Hertz required at Output, as 1500 RPM's to Generate 50 Hz for Europe and other countries regulated by those AC Output Frequencies.
3- On Both Commutators there are Two 'Positive' Half Cycles, represented by Quadrants I & III, or an 'Ascending' (Forward Sequence) from Groups 1 to 8.
4- Therefore, this setup allows us to have Both, Negative & Positive Brushes, set at exactly 180º on the Rotor, like shown on Diagram, both starting exactly at ·#1  Position Negative on Quadrant I, as Positive at Quadrant III.
5- As also there are Two 'Negative' Quadrants (Return Cycles) or from Group 8 to Group 1 represented as Quadrants II & IV

Contrary and Superior to a 16 Elements-Contacts Commutator (Figuera OEM) which requires for Rotary System (Motor) to reach 3600 RPM's to just generate One Full Cycle per Revolution., AS 3000 RPM's for 50 Hz.

PLEASE, KEEP DONATING!!

Thanks and Regards

Ufopolitics

[Ufopolitics]

Hello All,

@ Identified Builders Group

I "wonder" where are ALL the Great Builders - Members of this Forum??!!

Some of You, I know you have already built your 32 Elements Commutators...or send it to be built...

Or are you just waiting for me to finish building my Dual, Bipolar Commutator, as start testing it??

If that is so, then you will have to wait for a longer period of time...because I am trying to make now some Financial movements to be able to handle my actual situation.

As that is taking a Priority at this time.

I would love to see some images of some going "Building Progress" about this Setup...

Take care all

Ufopolitics

[Ufopolitics]

Hello All (Members and Guests)

So far, out of the 185 Members on this Forum I got Donations from just Seven Members...THANK YOU!!

Out of the Thousands of "Free Views" from Guests...I have ZERO Donations...

On the Overunity Archives Forum, having 85,000 Members, I had ZERO Members that have joined on Paid Subscriptions...
The average "free" GUESTS views on Overunity Archives range from 17,000 to 32,000 views...

I HATE TO BE "BEGGING" FROM ANYONE AS I HAVE DONE SO FAR...AS I ALSO LOVE TO ACT UPON RESPONSES

So, as Rule #1:

I have decided to "Momentarily" set on "Maintenance Mode" the Overunity Archives Forum, meaning ALL Forum will Turn OFF.(AS OF NOW!)
And, as Rule #2:

I am closing THIS FORUM to be viewed by ALL Guests...in like the next 48 hrs...

And I do NOT really care if the 'Views' drop down...I do NOT make money out of "views"!!

Further on, I will take another approach on Members of this Forum.

AND I AM SORRY, BUT DUE TO THE VERY WEAK RESPONSES I HAVE GOTTEN FROM MAJORITY OF MEMBERS HERE TO SUPPORT ME...
THEN I FEEL LIKE I DO NOT HAVE TO KEEP ANY CLEMENCY AT ALL.

And I am referring to MAKING THIS FORUM - IN THE NEAR FUTURE- ONLY BY PAID MEMBERS SUBSCRIPTIONS PARTICIPATION.

AS, IF ANYONE OF YOU DO NOT LIKE MY APPROACH...THERE IS THE DOOR WIDE OPEN!!

Again, THANKS TO ALL SEVEN MEMBERS WHO HAVE DONATED SO FAR!!

Ufopolitics

[kampen]

Dear Ufopolitics,

I fully agree with your decision.
To be honest, I have also been wondering why, out of 185 registered members, only a handful have stepped forward to support you financially, and even more concerning, why almost nobody is actively attempting to replicate your work.

Thousands of guests are viewing the forum, tens of thousands of views on the Archives, and yet virtually no material support or participation. 
That clearly shows a pattern.
 
Many seem willing to watch, read, and follow developments, but very few are willing to contribute, whether through donations, replication efforts, or technical feedback.

It increasingly feels like a large portion of viewers are simply waiting for a ready-made "cooking recipe" and a fully working unit placed on the table, preferably delivered free of charge.
 
That is not how serious experimental research works.
 
Progress requires participation, shared responsibility, and commitment.

You have invested years of effort, knowledge, and personal resources into documenting and explaining everything in detail. 
Expecting at least minimal reciprocal support is not begging; it is reasonable.

If transitioning toward a paid-membership structure is what ensures sustainability, seriousness, and filters out passive spectators, then it may indeed be the right move.
 
Those who truly value the work will remain.
 
Those who only want free consumption without contribution may leave, and that is perfectly acceptable.

Quality over Quantity.

I stand fully behind your decision and respect your position.

Kind regards,
 Alex