FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[Cornboy]

  Love your ART work explanation, UFO, so do you still have 4 larger Field coils at 90 degrees each? As in the diagram.

 All the Best  Cornboy,    

[Ufopolitics]

Love your ART work explanation, UFO, so do you still have 4 larger Field coils at 90 degrees each? As in the diagram.

 All the Best  Cornboy,   

Hello Cornboy,

Thanks, I believe graphics have no language barrier, that is why I put much effort in making them as neat as possible.

The Field Coils on this design are ALL the same spec's as all Sequential Coils.

It is written on my second post #250, Page 51, when I started this TPU Method explanations:

FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED - Page 51 (overunitymachines.com)

[...]
Now, ALL COILS are wound with the same exact resistance, same number of turns, same gauge, including ALL FOUR FIELDS 1, 2, 3, 4. (here is what differs from previous builds, where Fields had a higher Resistance and greater number of turns.
[...]

That way, by having ALL Coils the same resistance, same number of turns, same spec's, maintains resistance-amperage balanced, during operation for all groups switching.

Regards

Ufopolitics

[Ufopolitics]

Hello,

Ok, I will reuse this image I have uploaded before (Post 265, Page 54) , because it has more info than what was explained on that post:

On the inner part of the Square formed by all 32 Resistors/Coils, I have set Four (4) Brackets, that are light blue and light magenta color...they extend from a positive to a negative ACTIVE contact.

1-The Upper-Center Bracket (Blue) comprehends: Negative input coils/resistors 6, 7, 8 and F1, plus on the right also Positive resistor/coils 2, 3, 4, 5...Totaling 8 Coils.

2-The Right (Magenta) Bracket comprehends: Positive Input Coils 6, 7, 8 and F4, plus Negative side Coils 2, 3, 4, 5...Totaling 8 Coils.

3-The Center-Lower (Blue) Bracket comprehends: Negative Coils 6, 7, 8 and F3, plus Positive Coils 2, 3, 4, 5...Totaling 8 Coils

4-And finally, Left (Magenta) Bracket comprehends: Positive Coils 6, 7, 8 and F2 plus Negative Coils 2, 3, 4, 5...Totaling 8 Coils

So, INCLUDING FIELDS, there are ALWAYS Eight Coils ON per this Dynamic Brackets, delimited by the Four Power Input Contacts of two Positives and two Negatives.

These Brackets MOVE along with the positioning of the Power Input +/- ...so, this adds and subtracts coils every time power input contacts switch, back and forth.

And something else I want to explain here...

There are NOT "Positive Coils" or "Negative Coils" here, I just use that term as Reference, to Identify Coils, based on the Four Quadrants, Two Negatives and Two Positives.

But in reality, ALL Coils need to get a Positive and a Negative, in order to function...so, this term "Positive or Negative Coils" is just for explanation and localization purposes only.

ADD 1: Another thing that I wanted to clarify here...

The Fields Coils here are just "different" from the other Coils, on the fact that they do not reverse electrical/magnetic polarities at any point during operation, simply because they are out of the switching contacts.

Fields will always receive Positive-Negative from the same two contact points.

Regards

Ufopolitics

[Ufopolitics]

Hi again,

For example, I have done this other image of the same Perspective view like previous post...but, here I have set all Input Contacts (+/-) at Pin 1:

So, here I have also added the Repulsion Fields Positioning for Pin 1 on all Inputs.

Here the Repulsion Fields (N-S) have displaced ALL the way to Fields next to Pin 1. Attraction Chains behind Repulsion had expanded to the Maximum, while the one in front...where is it now?

It has contracted/compressed to its Minimal Expression...at Field in front of Repulsion. And this compression on respective Fields, serves to maintain a steady force on the fully expanded chain in front...

And this is the way this setup works...Moving Positive and Negative Charges at UNISON, maintaining the SAME NUMBER OF COILS INVOLVED, keeps the Magnetic Field BALANCED with the SAME STRENGTH during all Displacement Back and Forth.

Please note, we have Eight Coils between Pos.-Neg. Contacts ALL AROUND. And we ALWAYS WILL, for every contact displacement!!

Regards

Ufopolitics

[Cornboy]

 Thanks for the clarification UFO, i thought that was the case.

  Regards Friend,  Cornboy.