FIGUERA'S AETHER MAGNETIC FIELDS LINEAR PUMP, REVIVED

[Ufopolitics]

Hello again,

And if you go further back, like I did...to page 4, post 18...on Dec 2, 2023...

I even made this Method on a 3D CAD...and compare it to Figuera way to connect it on right of image:

Note: Last night I was starting a 3D CAD, animated, where as brush moves, it varies Field(s) Volume, exactly as I have displayed on previous images here...to make a short video...and this triggered, going back to my previous notes...to have a full review of my previous work.

Regards

Ufopolitics

[Ufopolitics]

Hello again,

Ok, so, now I am winding sequential coils with 23 gauge, around 3.0 Ohms each...and I only need to make seven to test Method 2...However, I will be making Eight coils total...

Why?...because, I will be going back again, to retest Method 1, with Eight Coils, the Full test, (prior, I did only the "halfway test" which was very positive), however, when I added Four more coils, it did not work as expected...so, now I will do it -again- with a higher resistance coils, all eight.

Regards

Ufopolitics

[Ufopolitics]

Hello everyone,

Again, I would like to specify that This is NOT a Topic to "discuss" about Figuera Patent, NOR "suggest improvements" about Figuera's Patent, nor any other one..

This is a: SPECIFIC DISCUSSION TOPIC ABOUT MY METHOD(S).

And I, will listen and Discuss ONLY with Members who has shown -at least- one build, or that are in the Process to build one, design one, or Anyone, who have any specific questions or doubts about MY DESIGN.

Ufopolitics

[Ufopolitics]

Hello to All,

Ok, on the next page I will be uploading a couple of testing videos, plus some definite and detailed Graphics on Method 2, about Magnetic Polarity Visuals, plus coils winding details.

Thanks

Ufopolitics

[Ufopolitics]

METHOD 2 : TESTING REAL MAGNETIC POLARITY READINGS FOR A FULL COIL ASSEMBLY

Hello to All,

Ok, here is a short video, where I am just connecting FULL DC POWER to ALL COILS in SERIES...As they are going to be connected on NEXT TEST.
Note: This Video on Polarities of FULL COILS, I did it AFTER running the Test Video...reason why I mention "as  on previous test video"

Only the Two End Terminals, of the Two End Coils, which are BOTH connected together, to negative for the Generator purposes, I am here splitting them, and the one on Left End, I am applying Negative as the other Terminal Positive...then check Magnetic Polarities.

And here is the Graphic for those Connections...

Ok, here is where some confusion may arise...so I made graphic as clear as water...clean water, of course...

ALL COILS ARE IN SERIES ON THIS TEST.

1-Reason why the Amperage is only 1.1 Amps at 36 Volts. While, during testing, the Two Main Field Coils or Primaries are connected in PARALLEL, as per Figuera Diagram.

2- ALL Coils are WOUND CCW, ALL...and set exactly as shown on Diagram.

3- The Last Coil is "reversed" but still, is CCW aligned with all the rest.

And we are still getting a Full Attract Magnetic Chain on this full series coils of a N/S.

Again, I will be adding to this post...later on.


Regards


Ufopolitics