BUILDING A 'GRAVITY FIELD' COIL

[MerLynn]

A 3D magnetic Field Pattern is like a 2D pattern of a rock thrown onto a lake.

Throwing 2 or More Magnetic Field Pattern Rocks on the water creates a NEW SINGULAR FIELD PATTERN.

We live in a Unified Field Pattern Universe. Any combination only creates a New Single Pattern.

it is just reading Fields, period.

How does one 'read' Fields separately? or is that the discovery to be made? How Joe reads or SEES Fields is exactly HOW he invents...... usually working towards a usable outcome and water is much more fun that coils and magnets as Element Water is a LIQUID MAGNET. Same as Wind and Fire.

[Ufopolitics]

A SPRING PERMANENT MAGNET GEOMETRY

Hello All,

Ok, in order for all to have a full 3D View of what I am talking about, here I took my time (that I do NOT have) to build a 3D Model and to present the main and SIMPLE model below:

And above I have done a "Spring Permanent Magnet" designed like NO ONE have ever seen before (and if any of you have any "doubts", then try to buy it with your local magnet supplier)...and in order to 'magnetize' this steel spring, you must wind a coil all around the spring steel structure, then power it up with high DC voltage, in order to obtain the SHOWN Polarization, or North & South Poles.

Now, get that Permanent Spring Magnet installed on a Steel Cylindrical Core...like shown on above image...then READ and Visualize Polarities on the Main Field Axis (Yellow Arrow).

As you all can see the Counterspace plane (Bloch Wall) I have shown as the green line at exactly the center of spring, between both poles extensions.

And, again, I am designing it on the SIMPLEST possible way to show you the main structural Geometry I am referring to. Meaning, here that permanent magnet spring only have exactly TWO TURNS around main steel cylinder core. Where each turn ends exactly at green line or counterspace plane (Bloch Wall).

And the purpose of this test, is to view what kind of field would be generated at the Yellow Axis or 'Main Field'.

Regards

Ufopolitics

[Ufopolitics]

CHANGING THE 'GEOMETRY' JUST A BIT...

LINEAR-CROSSED SELF ATTRACTING POLES (OF THE SAME FIELD)

On image above, I have just "twisted" BOTH ends of that steel spring magnet, in such smooth fashion, that each linear projection from each North-South Pole Center, CROSSES exactly through the Center of the Bloch Wall, in a perfect straight line, represented here by a red double arrow.

We will have an Attraction between North-South Poles, nothing out of the 'ordinary' right?
...except here, on this particular Geo, the attraction is done between the Two Poles which belong to the SAME Magnetic Field.

If we are to find any similarities on this 'modified spring geometry' we could easily compare it to an Infinity Symbol in 3D, except, there is an Open Gap between the Three Elements in play here: North Pole, Bloch Wall and South Pole...

Ok, so the question here is...what would happen when we make this change on the Structure of this Spring Magnet?...Would it change any parameters previously read with the straight spring shape presented on previous image? Changes related to the Main Field generated at the center core...of course.

Whatever that Field be...Magnetic, Electric, Gravitational or something else?

Regards

Ufopolitics

PD: Please remember to keep Donating to help me economically with the situation I am facing with my wife's Cancer Treatment!!

I truly and sincerely appreciate it!!

Thanks!!

[Ufopolitics]

Hello All,

A Spring Magnet of this design shown previously does not exist, we will have to specially make the CAD Work first, then give it to the Magnet Manufacturer, as this whole process will cost a fortune, and some manufacturers require a minimal order to start the building process of this magnet. Plus, we will not be able to "modulate" the Magnetic Field by adding more or less power...

So, above is another view of the 3D Image-Model, except, this time I have wound a plain spring steel core (NOT A MAGNET ANYMORE) with an enameled wire coil.
I did on purpose that coil wires look "loose" and spreaded apart, and not in a tight coiled shape to the spring steel core, and the only purpose of this, is that you would be able to look through the inside wrapping configuration fashion.

However, in reality, this is done like any of my regular coils way of winding, wound tightly and turns as close as possible to one another.

Also, on this model, in order to keep it simple, I only have a total of just TWO Turns of 'Spring-Coil', (like I have mentioned previously) However, in order to generate a Stronger Main Field on the center of spring, we will need more turns than just two, maybe Six or Eight total turns.

Now, in order to build a strong Magnetic Field on the Coiled-Core-Wire that we will use, we need a certain balance between Voltage and Amperage, say for 12V we will need like 0.5 to 1.0 Amps.

Then we calculate, based on the wire we have, how many feet we will need -resistance wise- to have a Total Length of wire we will need, related to the enameled wire gauge we have available.

Then we proceed to make our Spring Steel Core, based on a size that we could wind all our enameled wire (magnet wire)...Then making the Center Steel Core that will go inside the spring coil (not shown on this image above)

Regards

Ufopolitics

[kampen]

@ All,

I am uploading a Wire Resistance Calculator Combined Spools as an Excel Tool.
Hope this will be any help.

Greetings, Alex