How to build a Permanent Magnetic Shielding device applied to a workable motor

[citfta]

The electrical input power only needs to be 1 /10 th the total output power of the device to produce this effect.

Sorry, but I don't see any mechanism to support this claim.  What I see is an elcctromagnet driving a PM.  Just like any other pulso motor.  So please explain why you think it would only take 1/10 the power of the output.

Respectfully,
Carroll

[Classic]

The electrical input power only needs to be 1 /10 th the total output power of the device to produce this effect.

Sorry, but I don't see any mechanism to support this claim.  What I see is an elcctromagnet driving a PM.  Just like any other pulso motor.  So please explain why you think it would only take 1/10 the power of the output.

Respectfully,
Carroll

It isn't for me to explain but, what I see there permanent magnets placed in the middle are in fixed position and only the shield rotate. According to the test in your video the required force to move the shield is much smaller and permanent magnets on the 2 driving wheels are fixed to the wheels and they will be pushed away when shield rotate as shield is not continuous and act as reluctance impulse when permanent magnets in fixed position in the middle are exposed to permanent magnets on the wheels.

In your video you have lookup for a different interaction and just a single test for sliding shield between the 2 magnets. Sliding a shield between 2 magnets in reluctance requires less force than the force of repulsion between the magnets placed at 90 degrees of the shield. In the proposed kinetic diagram sliding movement is replaced with rotational movement of the PARTIAL shield ... and I can see it is possible to even add 2 more shafts increasing the torque output if the interaction between permanent magnets can be focused.

Also, instead of a motor it can be a generator if permanent magnets are all in fixed position and will have coils on top as the blochwall will be moved simulating a movement of a magnet inside the coils. And coils will be on every single magnet. Probable just adding another disc on the same shaft may provide the electric power to drive the motor spinning the shield.

At least this is how I see it working and Dr Walzak can explain better to confirm or not this operation.

[Dr.Wlazlak]

Thank you Classic You noticed the 2 magnets in the shielding device are fixed
The shield only need to be electric powdered for a short time ( this however is unknown - but if noticed the rotation of the motor is 10 deg to open the shield totally ( where the power can be turned off )
What that means is out of a 360 deg rotation power ON is 60 deg total time on - any one interested do the math
But part 2 to the energy needed to make the electrical shield work ------ it is part DC. electrical motor using permanent magnets as the field - A normal Dc current motor will push itself to full speed unloaded at !/10 it designed output power - Because the Shield only needed to be able to push itself away exposing the permanent magnets the produce the real output power of the device -----((( being power ON at 360 / 60 and 1/10 total power output needed - that is much less than 1 /10 th after all --- ( If one understands how thing work in the first place ))

thanks Classic for your comment: Hope that answer most of the questions asked - Dr Wlazlak

[Classic]

Well, when you present 2 devices without mentioning may confuse others.

Are you aware one of Don L Smith devices is a generator hat works exactly as you draw your permanent magnet motor and has coils on magnets as I said above ?

[Dr.Wlazlak]

Well: Don Smith : Interesting He had build very high output device using a very interesting formula
W = 0.5 * L * A2 * Hz ( The normal formula by normal electrical Engineers is )
W = Volts time Amps ( adding things to the formula that do not apply like Hz. ) Well:
That sounds like someone was self learned themselves new not possible concepts in BS. to tell people they can build very big high output system --- really?
lets see normally Watts = 1 volt times 1 amp = 1 watts ( that is in every electrical hand book every written

now the Don Smith formula to get the energy you want from nothing = Watts = 1 volt times 1 amp times 10000000 hz. = ( 10000000 watts ) that does not exist = very high output systems of BS. ( but maybe this is why no real Scientist or electrical engineers or anyone that was really educated by real educated people that know the real - real way things work --
took anything he said serous - only the people that do no know how the real world of electrical things work would think he was real smart - 

I just wanted to point this out - because all - everything he shown talked about - presented was ( garbage )

My motors and Ideas from above ( do not resemble any of Don Smith's ( garbage stuff ) no way !!!!!

believe it or not - only the people that are educated enough to know the difference matter anyway;
nothing personal of course - I don't really care what you don't know - And why you don't know it -

That is why people should read book made by educated people not self learned science fiction comic books writers ( Then say " wow they really know their stuff "

I just wanted to clear the Air on that subject: All my items conform to the laws of physics and Science and to the laws of thermodynamics The data comes mostly from an Electrical Engineers hand book 1933 ( noting has changed from then to now ) I showed this hand book to a professor of Electrical Engineering and he said " never lose that book" The value is endless 

End of this post - Please - unless you have a real comment that is based in facts - Please ----
Keep it to yourself - And I won't have to correct the comment - ( Moving ON )

The next post is of a third type shield motor where the Permanent magnet rotate and the Shield is fixed

Again the main power source Is Permanent Magnetic Potential Energy made into motion by the use of Atoms 

Note: The reason I am posting this information is ( The value is endless ) nothing more nothing less 

retired engineer - making the some of the (Void) - filled -

I'LL Be Back - term.