Discussion about the Lockridge Device

[hiwater]

Lots of information in that link. BEMF is sort of a governor in a regular motor or generator. Putting a load on a generator the magnetic feild (armature reaction) opposes the forward EMF. Tries to slow it down. Without this the motor side of the generator would increase in speed until self destructing.

The resistance of the light circuit and or generator circuit (tri coil) regulates the rpm. Light circuit and gen circuit all need to be matched to each other inside the case and outside the case. These motors will runn up over 10,000 rpm if you let them. The circuits regulate the speed with their own resistance. And use the armature reaction as an aid in rotation.

[rakarskiy]

I was collecting information about this amazing motor, especially since a WWII veteran with whom I had the fate of working in the same team (auto electricians) told me about a similar self-propelled generator for a German portable radio station. Unfortunately, he did not see the insides of the generator, but he saw a demonstration of its operation in 1945 in Austria.

There is another machine from the 21st century (created in Rostov-on-Don /RF/) in the laboratory of physics professor Kanarev G.F. with the participation of electrical engineer Zatsarinin S.B.

I reprinted the description a long time ago on my website (use a translator to read):

Рекуперационный Мотор-Генератор Канарёв Ф. М - Over Unity Systems - Каталог статей - Free Energy Ukraine

The video shows that the motor rotates itself, does work by supplying energy to the electrolyzer and charging the batteries.

.

https://www.youtube.com/watch?v=IOxbcSxUPnY

[Ufopolitics]

@rakarskiy 

I am sorry but that lousy 0:39 second's video does NOT prove absolutely nothing!...then I went into the guy's YT channel...and NOTHING ELSE, related to this motor.

I can make a better video than that...with much smaller battery, running for much longer time.

We can NOT be posting here these type of videos as we write all that motor does WITHOUT the proof on video, proper measurements, etc.

The Lockridge Device was very simple and basic, NO BATTERIES, just a pull on a rear cord attached to a small pulley on shaft, just like starting a small gasoline weed eater.

And one pull and motor start and keeps running at 5000 RPM's...while lighting 300 Watts light bulbs set.


Ufopolitics

[rakarskiy]

I gave an example of a device that is made according to the parametric principle of pulse construction. By the way, experts from the Russian Academy of Sciences came to their laboratory to catch them falsifying data. (This work is already more than 12 years old). As a result, the experts did not find any contradictions to what Professor Kanaryov claimed; naturally, everyone went silent, as is customary in Russia. Recently I explained the principle of operation to one engineer who wanted to build something similar, but did not do so because of the impossibility of using cores from donors of standard motors. The engineer started experimenting with Park Jae-sun's patent, using standard parts from DC and AC motors.
 
Regarding the Kanarev-Zatsarinin motor, their diagrams and descriptions are freely available, we can say that this is a system without magnets with controlled windings on the rotor/anchor and stator. A more complex principle with windings on the rotor and stator than the parametric machine of Peter Lindemann, but the principle itself is general.





Wind two windings on a cross-shaped core rotor and complete the stator in a circle with two obvious poles. The control is more complex and the winding system must be designed for motor and generator pulses. Get a parametric pulse machine.

Here is the first Kanarev-Zatsarinin engine, all they needed was a presentation and not evidence for YouTube viewers or movie theater viewers chewing pop-food.

[hiwater]

UFO  The residual magnetisim has a lot to do with getting this MGD  ( Motor Generator Device) up and running from a stationary point. It increases as the rpm increases.

There is a lot of speculation that this device did run at 5000 rpms. Maybe it did. From what i found out was that the Tri coil is pulsed too fast for it too work at that speed. There is not much transformer effect for it to work properly.

Running too fast it all motor. The brush positions designate this. Same the other way it can generate but no speed.

Other than the motor coils. The other 2 feild coils need to be matched to the lights or the tri coil primary. Same with the other winding on the tri coil. It will either speed up or slow down. If it speed up lights dim. Slow down lights get brighter.

Just some things I have found out experimenting with this unit.