How to build a Permanent Magnetic Shielding device applied to a workable motor

[Dr.Wlazlak]

The Electromagnetic coil above is designed using a Permanent Magnet attached to one end
This is a 2 energy device system

The Electromagnet is a unity device of 100 percent input to 99 percent maximum output 
this is the first Energy of a 2 energy system

The Permanent Magnetic material does not use energy to produce force to kinetic motion of energy
this is the second Energy of the 2 energy system 

because the Permanent Magnetic Materials do not use input energy to produce output energy in this technology
the input watts used is 1/2 the total output power being produced

meaning: if the ( lone ) Coil being power on at 50 watts and will produce 100 gauss magnetic flux 

and when the Electromagnetic coil is OFF the Magnet metals on the iron core will produce the same 100 gauss 

When both energies are on one device such as shown above:

When the Electromagnet is power ON at 50 watts the combination of the 2 Energies will produce 2 times the
output gauss  ( of the lone electromagnetic coil ) ( 2 forces of unity ) magnetic flux -- being 200 gauss -- at the 50 watts input power

The Permanent Magnetic metals are producing Potential energy and using on an iron induction system to produce 
kinetic motion of power output will use ( Less ) input watt electrical power to produce the same as a normal
type Unity motor system 

[Dr.Wlazlak]

Hello, People: In order to understand a little more on the concepts a document has been placed on the internet
on Quora - using a search engine or Google the line below will go to that layout document
 
 ( Energy to torque Conversion Motor - EttCM - Quora )

Under the - ( Overview of this Technology ) this layout can be found 

Bits and peaces - in time the whole pie will develop - its a start -

notice: the part the says 1075 - 280 = 795 ( 795 ) is the power output of the prototype testing EttCM motor

A normal electrical motor at the same watts input will only produce 280 grams output

Its a start - Thanks - EttCM energy technology

[Dr.Wlazlak]

( Energy to torque Conversion Motor ( system ) EttCM Energy technology 

The next section will talk about the ferrous or iron induction field and how it relate to the increased force of magnetic attraction by the square of the distance applied in an ( Air Gap ) 

(Air Gap ) -- In order to have movement there must be a distance of travel between point A and point B
Note: without movement there is No Energy being produced
The Air Gap is that distance - Because magnetic force depletes by the square of the distance the shorter
the distance of the ( Air Gap ) of travel the higher the energy of force will apply to the output power developed

A testing device was built to test the maximum output force of the ( Air Gap ) in order to know the
the maximum power output a EttCM coil could produce in a motor application 

( The Photo of the testing device showing the EttCM coil in that test )

Notice: from the center of the EttCM coil to the ferrous or iron induction plate there is an ( Air Gap ) distance
of about 1/2 inch - That is the maximum distance of pull force before it pulls away from the induction plate's 
attraction - ( That distance is Very Important ) because all the power being produced is from ( 1 EttCM ) coil's
[color=var(--body-txt-color)] total output factor of the horsepower being produced - from the ( 1 coil's electrical watts ) being used to[/color]
produce the ( Total output horsepower ) Note: Only 1 coil's input power -- per the Air Gap distance - is all that
is needed ( as input watts used to produce the total output power )

Note: this concept is totally unknown as a power producing method however it is used in many applications without fully understanding---and this is one of those application

( The next page will talk about how this ( Air Gap ) distance it applied to the horsepower output used in a motor application and the input of 1 coil's power [color=var(--body-txt-color)]watts used to produce the total output horsepower effects )[/color]

Thanks EttCM energy technology 

[Dr.Wlazlak]

It is a little hard to comprehend ( 1 Coil's energy producing all the horsepower output of a motor )

But a very common technology does the same thing in a different way 

Gears 

On a set of gears there are many teeth - but only 1 tooth to 1 tooth make contact at any given time
What that means is 100 horsepower can be transferred using only 1 tooth
all the rest are neither using or transferring energy in any way

In the same way on the EttCM motor design 1 coil is power ON -- All other coils on the motor are Off
meaning: 100 horsepower can be transferred using 1 coil's power ON ( in the same was a 1 tooth of a gear )
The rest of the many coils used in the motor design are neither using or transferring energy in any way

If only 1 coil's power is ON and transferring all it power to torque: 

The ( sequence of events ) if ( 12 coils are on a EttCM motor design ) 1 coil at a time is ON -
the other 11 are OFF 

As the motor rotates ( In the Air Gap high force location ) the EttCM coil is ON -- once it moves out of the Air gap location it turn OFF ( and the next coil of rotation is turned ON ) ( One after the other )

A 50 watt EttCM coil can produce on a 11.25 diameter induction field motor - (1.075 kilograms of pull force
Action motion ) ( the counter reaction is 280 grams reverse force ) = 795 grams force pull usable output power

This will produce about 250 watts per coil used on a EttCM motor design as shown below

In a 12 coil system Only 1 coil is On power the rest are off 
The 1 coil at a time uses 50 watt electrical Dc. current power ( note: that is the total input use to produce all 
the horsepower output produce in this type of design
having 12 coils one after the other producing output power the total power using 50 watts input is about
12 time 250 = 3000 watt output power - minus Friction of the motor's factor of moving parts 

In the Unity of the technology that is using ( 6000 percent Less input power to produce a Unity of 100 percent )
Output power in the EttCM technology designs 

( This all conforms to all the Laws of Physics and Science and to the Laws of Thermodynamics )

Thanks EttCM Energy technology